Información General

• Autores: José Carlos Rico Fernández (ed. lit.), Eduardo Cuesta González (ed. lit.), Gonzalo Valiño Riestra (ed. lit.), Victor Manuel Meana Díaz (ed. lit.), Pedro Fernández Álvarez (ed. lit.)
• Editores: Manufacturing Engineering Society International
• Año de publicación: 2021
• País: España
• Idioma: inglés
• ISBN: 9788409292295
• Recoge los contenidos presentados a: Manufacturing Engineering Society International Conference (9. 2021. Gijón).
• Texto completo no disponible (Saber más ...)

Resumen

• español

  Este libro incluye los resúmenes de los trabajos que finalmente han sido aceptados para su presentación en el MESIC 2021. Son más de 170 ponencias, organizadas según los temas del Congreso y en el que investigadores y profesionales de 15 países diferentes han participado.

• English

  This book includes the abstracts of the papers that have been finally accepted for presentation at the MESIC 2021. There are more than 170 papers, organised according to the topics of the Conference and in which researchers and professionals from 15 different countries have participated.

Otros catálogos

• Red de Bibliotecas Universitarias (REBIUN)

Listado de artículos

• • Plenary conferences

    • Past, present and future of the manufacture of structural pulvimetallurgical components

      Nestor Martínez García

      págs. 23-23

      

    • Towards self-aware machine tools for traceable production

      Rene Mayer

      págs. 24-24

      

    • The role of Extended Reality in Manufacturing

      G.-C. Vosniakos

      págs. 25-25

      

  • Advances and innovations in manufacturing processes

    • Analysis of the Turning Efficiency of the Cu-Ni 70/30 ASTM B122 Alloy underMinimum Quantity of Lubricant Conditions

      E. García, V. Miguel, Antonio Martínez, María Carmen Manjabacas Tendero, Juana Coello Sobrino

      págs. 33-33

      

    • Turning Process with Ceramic Inserts of ADI Cast Material, Surface Analysis

      Adrián Fernández Roig, Haizea González Barrio, P. Fernández Lucio, Amaia Calleja Ochoa, Gorka Urbicain Pelayo, L. N. López de Lacalle Marcaide

      págs. 34-34

      

    • Comparison Between Milling Roughing Operations in Gear Full SlottingManufacturing: Trochoidal, Plunge and Conventional Milling

      Gaizka Gómez Escudero, P. Fernández Lucio, Ander del Olmo Sanz, G. Martínez de Pissón, A. Jimeno, Haizea González Barrio, L. N. López de Lacalle Marcaide

      págs. 35-35

      

    • Milling Angular References and Process Parameters on Fibre Reinforced Plastics

      María Dolores Navarro Mas, Amparo Meseguer Calas, Isabel Natividad Ordeig Fernández, Joaquín Lluch Cerezo

      págs. 36-36

      

    • Advances in Efficiency in the Groove Milling of Aluminium EN AW 2024-T3 With Zig-Zag and Trochoidal Strategies

      Oscar Rodríguez Alabanda, Pablo Romero Carrillo, G. Guerrero

      págs. 37-37

      

    • Deep Hole Finishing of Inconel 718 Slmed Features by Endmilling and Reaming

      José David Pérez Ruiz, L. N. López de Lacalle Marcaide, Patricia Fernández García

      págs. 38-38

      

    • Prediction of the Dynamic Stiffness of Boring Bars

      Asier Astarloa Badiola, M. H. Fernandes, Iker Mancisidor Aizpurua, Jokin Muñoa Gorostidi, Zoltan Dombovari

      págs. 39-39

      

    • Design, Manufacturing and Validation of Chip Breakers in Ceramic Inserts for the Machining of Aeronautic Nickel-Based Superalloys Inconel

      Pedro Fernández Álvarez, I. Villaron, Octavio Manuel Pereira Neto, Francisco Javier Amigo Fuertes, Eneko Ukar Arrien

      págs. 40-40

      

    • Latest Trends in Basalt Fibre Applications and Implications of Machining Processes

      Rosario Domingo Navas, Beatriz de Agustina Tejerizo, Marta Maria Marín Martín, Roque Calvo Iranzo

      págs. 41-41

      

    • Analytical Study of the Melt Pool Distortion in the Laser Powder Bed FusionProcess Caused by the Angle of Incidence of the Laser and its Effect on the Surface Finish of the Part

      Aitzol Lamikiz Mentxaka, Sara Sendino Mouliet, Marc Gardon, F. Lartategui

      págs. 42-42

      

    • On the Performance of Super Abrasive Machining (SAM) on Small Diameter CBN Wheel Wear

      Héctor Bravo, Naiara Ortega Rodríguez, Roberto Polvorosa Teijeiro, I. Zamakona

      págs. 43-43

      

    • Resin Bonded Diamond Grinding Wheels Conditioning Using Sic Rotary Dresser

      A. Muñoz, L. Godino, José Antonio Sánchez Galíndez, Iñigo Pombo Rodilla, Ibon Tolosa

      págs. 44-44

      

    • Changes in Structure and Corrosion Resistance of Cryogenically Treated WC-Co Cemented Carbides

      D. Bricín, V. Prucha, Z. Jansa, Antonin Kriz

      págs. 45-45

      

    • Study and Analysis of the Wiredrawing of Cuzn37 Wires via Numerical Simulations and Slab Method

      Oscar Rodríguez Alabanda, G.A. Santana, J.C. del Rey, G. Guerrero

      págs. 46-46

      

    • On the Assessment of Formability and Failure af Polycarbonate Sheet Deformed by Single Point Incremental Forming

      Ana Rosa Sainz, Gabriel Centeno Báez, Maria Beatriz Silva, Carpóforo Vallellano Martín

      págs. 47-47

      

    • The effect of Different Epoxidized Vegetable Oils on Injection-MouldedStarch-Based Thermoplastic Polymer Filled with Almond Shell Powder

      Ana Ibáñez García, Santiago Ferrandiz Bou, A. Martínez

      págs. 48-48

      

    • Ball Burnishing Effects on Hardness and Residual Stresses in UDIMET 720 Pieces

      Jaume Rue Mascarell, Eric Velázquez Corral, Jordi Adalbert Marqués Salvador, Jordi Llumà, Ramon Jerez Mesa, José Antonio Travieso Rodríguez

      págs. 49-49

      

    • Methodology for Embedding Mineral Insulated Cables into 1.2311 Tool Steel for the Manufacture of Smart Tooling

      Marta Ostolaza Gaztelupe, Jon Iñaki Arrizubieta Arrate, Maider Muro Larisgoitia, José Exequel Ruiz Salas, Garikoitz Artola Beobide, Aitzol Lamikiz Mentxaka

      págs. 50-50

      

    • A Methodology for the Study of Friction Stir Welded Butt Joints Applied to Unweldable Aerospace Aluminium Alloys

      Irene Del Sol Illana, David Piñero Vega, J. M. Caballero, Antonello Astarita, Jorge Salguero Gómez

      págs. 51-51

      

    • Ontological Modelling of Welding Processes

      Lorenzo Solano García

      págs. 52-52

      

    • On Machining of Calmax Steel by EDM: an Experimental Study

      P. Karmirirs, E.L. Papazoglou, B. Leszczyńska, K. Zagórski, Angelos P. Markopoulos

      págs. 53-53

      

    • Analysis and Improvement in the Electrical Discharge Machining Process Used on the Manufacture of Moulds for Plastics Injection Moulding

      A. Costa, Luís Pinto Ferreira, F.J.G. Silva, José Carlos Sá, Maria Teresa Ribeiro Pereira, Paulo Ávila

      págs. 54-54

      

    • Study of Particle Size and Position on Debris Evacuation During Wire EDM Operations

      Borja Izquierdo Aramburu, Jun Wang, José Antonio Sánchez Galíndez, Iban Ayesta Aldanondo

      págs. 55-55

      

    • Study of the Tribological Performance of Ti6Al4V Textured with Pyramidal Dimples by Electro Discharge Machining

      Jorge Salguero Gómez, David Piñero Vega, Irene Del Sol Illana, Juan Manuel Vázquez Martínez

      págs. 56-56

      

    • Experimental Application of a Laboratory Equipment for Micro-Electroforming Using Models Manufactured with Additive Technology

      Carlos Jesús Sánchez Morales, María Dolores Martínez Rivero, M. D. Marrero, Jorge Salguero Gómez

      págs. 57-57

      

    • Laser Engraving of Chip-Breaker Geometry on Alumina Ceramic Cutting Tools

      Eneko Ukar Arrien, Jon Iñaki Arrizubieta Arrate, José Exequel Ruiz Salas, Marta Ostolaza Gaztelupe, Aitzol Lamikiz Mentxaka

      págs. 58-58

      

    • Effect of Laser Heat Treatments on the Hardness of Tool Steels

      J.N. Lagarinhos, Daniel Gil Afonso, Ricardo Nuno de Oliveira Bastos Torcato, C. Santos, M. Oliveira

      págs. 59-59

      

    • Preliminary Study of Abrasive Water Jet Texturing on Low Thickness UNS A92024 Alloy Sheets

      Fermín Bañón García, Alejandro Sambruno Ladrón de Guevara, Álvaro Gómez Parra, Pedro Francisco Mayuet Ares

      págs. 60-60

      

    • Manufacture of an Abrasive Jet Machining (AJM) Equipment Adapted for the Treatment of Rotary Flexion Fatigue Specimens

      M. Herrera, Carolina Bermudo Gamboa, F.J. Trujillo, S. Martín, Lorenzo Sevilla Hurtado

      págs. 61-61

      

    • Preliminary Study of the Hardening Effect and Fatigue Behaviour Enhancement through Vibration Assisted Ball Burnishing on C45 Steel

      Eric Velázquez Corral, Jordi Adalbert Marqués Salvador, Ismael Fernández, José Antonio Travieso Rodríguez, Ramon Jerez Mesa, Jordi Llumà

      págs. 62-62

      

    • Recent Advances in the Extrusion Methods for Ceramics

      Irene Buj Corral, D. Vidal, A. Tejo Otero, Felip Fenollosa i Artés, J. Elmesbahi, Pedro Fernández Álvarez

      págs. 63-63

      

    • Fused Filament Fabrication over Fabrics – Experiments and Applications

      C. Legoinha, Daniel Gil Afonso, L. Pires

      págs. 64-64

      

    • 3D Printing of Spare Parts: Experimental Study Using Non-Standardized Tests of The Maximum Supported Torque

      A. Cerro, Esther Molero Romero, S. Bosquez, R. González, Pablo Romero Carrillo

      págs. 65-65

      

    • Tensile Properties of Elastomer Process Through FFF for Biomedical Applications

      B. Adrover, Jordi Llumà, Ramon Jerez Mesa, José Antonio Travieso Rodríguez

      págs. 66-66

      

    • Mechanical and Electrical Properties of Additively Manufactured Copper

      Jon Rodriguez, Jose Ignacio Vicente Flores, J.C. Ezeiza, Aitor Zuriarrain Berasategui, Pedro José Arrazola Arriola, Daniel Soler Mallol

      • Texto completo

      págs. 67-67

      

    • Study for the Selection of 3D Printing Parameters for the Design of TPU Products

      Lucía Rodríguez Parada, G. Naya, Rafael Bienvenido Bárcena

      págs. 68-68

      

    • Study of the influence of laser energy density on the surface roughness of Scalmalloy® samples manufactured by DMLS technology

      C. Márquez, Juan de Dios López Castro, Leticia Cabrera Correa, L. González Rovira, F. J. Botana

      págs. 69-69

      

    • Experimental measuring of printing speed in FDM

      Rubén Dorado Vicente, Francisco José Pérez Latorre, Gustavo Medina Sánchez, Francisca María Guerrero Villar

      págs. 70-70

      

    • Evaluation of porosity in 3D printed trabecular bone structures for prostheses

      Irene Buj Corral, Ali Bagheri, Miquel Ferrer Ballester, Alejandro Fernández Domínguez

      págs. 71-71

      

    • Study of corrosion resistance in Ti 6Al 4V additive manufactured parts

      José Exequiel Ruiz, Jon Iñaki Arrizubieta Arrate, Jesús Manuel Vega Vega, Marta Ostolaza Gaztelupe, Aitzol Lamikiz Mentxaka

      págs. 72-72

      

    • Presentation of a concrete additive manufacturing extruder with online rheology modification capabilities

      L. Poudelet, A. Castellví, L. Calvo, R. Cardona, Roger Uceda, Felip Fenollosa i Artés

      págs. 73-73

      

    • Influence of printing conditions in Binder Jetting on the resin infiltration post-processing

      Susana Martínez Pellitero, Sara Giganto Fernández, María Ángeles Castro Sastre, Ana Isabel Fernández Abia, Joaquín Barreiro García

      • Texto completo

      págs. 74-74

      

    • Effect and Comparison on Mechanical Properties of Incorporating HNTs into a PLA Matrix by Injection Moulding and 3D Printing for Medical Applications

      Luis Quiles Carrillo, Juan Ivorra Martínez, Néstor Montañés Muñoz, O. Fenollar, Teodomiro Boronat Vitoria

      págs. 75-75

      

    • Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming

      G. Flores, D. Palomo, Andrés Jesús Martínez Donaire, Marcos Borrego Puche, J. A. López, Domingo Morales-Palma, Gabriel Centeno Báez, Carpóforo Vallellano Martín

      págs. 76-76

      

    • Research on desktop 3D Printing Multi-Material New Concepts

      Felip Fenollosa i Artés, Roger Uceda, A. Tejo Otero, L. Calvo, L. Poudelet, Irene Buj Corral

      págs. 77-77

      

    • The commissioning of a hybrid multi-material 3D printer

      A. Castellví, L. Poudelet, A. Tejo Otero, L. Calvo, Roger Uceda, P. Lustig, J. Minguella, Irene Buj Corral, Felip Fenollosa i Artés, L. Krauel, A. Valls, M. Ayats

      págs. 78-78

      

  • Trends in manufacturing systems

    • Enactive Manufacturing through Cyber-Physical Systems: a Step Beyond Cognitive Manufacturing

      Amanda Martín Mariscal, María Jesús Ávila Gutierrez, Francisco Aguayo González

      págs. 83-83

      

    • Influence of Product Variety on Work Allocation and Server Distribution of Flexible Manufacturing Lines

      A.G. Arteaga, Roque Calvo Iranzo

      págs. 84-84

      

    • An Approach to Reverse Engineering Methodology for Part Reconstruction with Additive Manufacturing

      Juan López Martínez, Carlos Vila Pastor

      págs. 85-85

      

    • Barriers to Lean and Pull System implementation: a Case Study

      A. Araújo, A.C Alves, Fernando Romero Subirón

      págs. 86-86

      

    • Lean Safety – Assessment of the Impact of 5S and Visual Management on Safety

      V. Manuel, José Carlos Sá, L.P. Ferreira, F.J.G. Silva, Maria Teresa Ribeiro Pereira, Gilberto Santos

      págs. 87-87

      

    • Assessment of the Flexibility of Implementing Lean Tools

      B. Pessoa, Luís Pinto Ferreira, F.J.G. Silva, José Carlos Sá, Paulo Ávila, José Enrique Ares Gómez

      págs. 88-88

      

    • Supply Chain Production Planning of a Manufacturing Project System 4.0: Case Study: Shipbuilding

      Magdalena Ramírez Peña, Víctor Pérez Fernández, Álvaro Gómez Parra, Rubén Montaño Vega, Moisés Batista Ponce

      págs. 89-89

      

    • Metabolism in Eco-Holonic Manufacturing Systems based on the Living Systems Theory

      María Jesús Ávila Gutierrez, Amanda Martín Mariscal, Francisco Aguayo González

      págs. 90-90

      

    • Life Cycle Assessment of Accessories of Personal Protective Equipment PPE of Easy Manufacture: Saver and Anti Contact Key

      Cesar Ayabaca Sarria, Carlos Vila Pastor, Iván Zambrano Orejuela, Washington Salvatore Reina Guzmán, Mario Cesén Arteaga, Miguel Ángel Carrión

      págs. 91-91

      

  • Precision engineering and Metrology

    • Defectology Characterization of FDM Drilled Parts

      Moisés Batista Ponce, Juan Manuel Vázquez Martínez, Pedro Francisco Mayuet Ares, David Piñero Vega, Magdalena Ramírez Peña

      págs. 97-97

      

    • Selecting Software Filter Settings for Evaluating Periodic and Aperiodic Surface Roughness

      D. Kubátová, A. Kaufnerová

      págs. 98-98

      

    • Influence of Different Wavelet Filtering Reconstruction Techniques Applied to Bidimensional Surface Texture Characterization

      C. Villena, D. Pazos, E.M. Andrés, Alfredo Sanz Lobera

      págs. 99-99

      

    • Novel System for the Automatization of Photogrammetric Data Capture for Metrological Tasks: Application to Study of Gears

      Manuel Rodríguez Martín, P. Rodríguez

      págs. 100-100

      

    • Validation of the Sandblasting Process in the Manufacturing of Precision Spheres for Non-Contact Metrology

      Eduardo Cuesta González, Victor Manuel Meana Díaz, P. Pastur, Braulio José Álvarez Álvarez, Pablo Zapico García

      págs. 101-101

      

    • Uncertainty Determination of a Microvolume Characterized through Confocal Microscope Technique

      M. Berzal Rubio, C. Barajas Fernández, J.M. Christopher, Beatriz Santamaría Fernández, David Muñoz Martín

      págs. 102-102

      

    • Environmental Conditions Compensation for a Length Measurement System Based in Laser Interferometry for Machine Tool Volumetric Verification

      Francisco Javier Brosed Dueso, Juan José Aguilar Martín, Raquel Acero Cacho, Jesús Velázquez Sancho, Jorge Santolaria Mazo

      págs. 103-103

      

    • Influence of High Precision Telescopic Instrument Characterization on Multilateration Points Accuracy

      Sergio Aguado Jiménez, Francisco Javier Brosed Dueso, Raquel Acero Cacho, Juan José Aguilar Martín, Jorge Santolaria Mazo, Marcos Pueo Arteta

      págs. 104-104

      

    • Evaluation of the Influence of Post-Processing on the Optical Inspection Accuracy of Additively Manufactured Parts

      Sara Giganto Fernández, Susana Martínez Pellitero, Joaquín Barreiro García, Eduardo Cuesta González

      • Texto completo

      págs. 105-105

      

    • Feasibility Analysis of Using Machinable Glass Ceramics to Manufacture Non-Contact Measurement Approach Metrological Artefacts

      Pablo Zapico García, Braulio José Álvarez Álvarez, Victor Manuel Meana Díaz, A. Telenti, Eduardo Cuesta González

      págs. 106-106

      

    • CT Image Quality Influence on Different Material Edge Response Functions for Accurate Metrological Applications

      Naiara Ortega Rodríguez, María Soraya Plaza Pascual, J. Iglesias, Ibon Holgado Garcia, Alejandro Pascual Molero

      págs. 107-107

      

    • Reference Standard for The Uncertainty Estimation of X–Ray Computed Tomography Measurements of Complex Macro- and Micro-Geometries

      J. A. Albajez, L.C. Díaz, José Antonio Yagüe Fabra, Roberto Jiménez Pacheco, Marta Torralba Gracia

      págs. 108-108

      

    • Analysis of the Effect of Porosity on the Mechanical Behaviour of L-PBF Inconel 718 Using XRCT

      Alejandro Pascual Molero, Naiara Ortega Rodríguez, María Soraya Plaza Pascual, Ibon Holgado Garcia

      págs. 109-109

      

    • Layer Contour Characterization in Additive Manufacturing Through Image Binarization

      David Blanco Fernández, Adrián Fernández Roig, Pedro Fernández Álvarez, Braulio José Álvarez Álvarez, Fernando Peña Cambón

      • Texto completo

      págs. 110-110

      

    • Tribological Characterization of Fused Deposition Modelling Parts

      Moisés Batista Ponce, Juan Manuel Vázquez Martínez, Irene Del Sol Illana, David Piñero Vega, David Blanco Fernández

      págs. 111-111

      

    • Evaluation of Mechanical Properties of FDM Components Reinforced with Fibre

      Pablo Rodríguez González, Pablo Zapico García, P.E. Robles, A. Soto, Joaquín Barreiro García

      • Texto completo

      págs. 112-112

      

    • Experimental Investigation of Contact Forces and Temperatures in Rubbing Interactions of Honeycomb Interstate Seals

      Daniel Soler Mallol, Mikel Sáez de Buruaga Echeandia, Pedro José Arrazola Arriola

      • Texto completo

      págs. 113-113

      

    • Development of a Quality Control System for the Supply of Silica Refractory Material from China

      David Álvarez, M. García

      págs. 114-114

      

    • Determining the Required Cleanliness Level Using Synthetic Test Contamination

      Patrick Brag, V. Piotter, K. Plewa, S. Umbach, M. Herzfeldt

      págs. 115-115

      

    • A Comparison of Fitting Criteria for Circle Arc Measurement Applications

      Roque Calvo Iranzo, A.G. Arteaga, Rosario Domingo Navas

      págs. 116-116

      

    • Robust Metrological Characterization of Circular Profiles

      Luca Greco, Jesús Caja García, P. Maresca

      págs. 117-117

      

    • Risk-based Inspection Planning for Hydrogen Technologies: Review ofCurrents Standards and Suggestions for Modification

      F. Ustolin, D. Wan, Antonio Álvaro, Nicola Paltrinieri

      págs. 118-118

      

    • Development of a Nakazima Formability Test Methodology for High Temperature Applications on Titanium Alloys Sheet Metals

      Jorge Ayllón Pérez, Valentín Miguel Eguía, A. Martínez, Juana Coello Sobrino

      págs. 119-119

      

    • Long-Term Stability Analysis and its Relationship with the Steel Structure of Gauge Blocks from Several Manufacturers

      Antonio Mínguez Olivares, J. Moreno, J. de Vicente

      págs. 120-120

      

    • Effect of Ambient Temperature on Machine Tool Compensation Functions

      Sergio Aguado Jiménez, P. Pérez, J. A. Albajez, Jesús Velázquez Sancho, Jorge Santolaria Mazo

      págs. 121-121

      

  • Technologies for supporting manufacturing engineering and systems

    • Merging Complex Information in High Speed Broaching Operations in Order to Obtain a Robust Machining Process

      Ander del Olmo Sanz, G. Martínez de Pissón, Leonardo Sastoque Pinilla, Adrián Fernández Roig, Amaia Calleja Ochoa, L. N. López de Lacalle Marcaide

      págs. 127-127

      

    • Analysis of AZ31B – Ti6Al4V Bimetallic Extrusion by Numerical Simulation and Taguchi Method

      D. Fernández, Álvaro Rodríguez, Ana María Camacho López

      págs. 128-128

      

    • Numerical Analysis of Necking in Stretch-Bending based on Modified Maximum Force Criteria

      Domingo Morales-Palma, Marcos Borrego Puche, José Andrés López Fernández, Andrés Jesús Martínez Donaire, Gabriel Centeno Báez, Carpóforo Vallellano Martín

      págs. 129-129

      

    • Three-dimensional Numerical Analysis of Tubular Adhesive Joints under Torsional Loads

      T.J.S. Oliveira, R.D.S.G. Campilho, M.G. Cardoso, Isidro Sánchez, L. Ramalho

      págs. 130-130

      

    • Modelling Adhesively-Bonded T-Joints by a Meshless Method

      Isidro Sánchez, L. Ramalho, R.D.S.G. Campilho, J. Belinha

      págs. 131-131

      

    • Investigation of Ball Burnishing Process Using Vibration and Acoustic Emissions Sensors

      Ismael Fernández Osete, Eric Velázquez Corral, Jordi Adalbert Marqués Salvador, Jordi Llumà, Ramon Jerez Mesa, José Antonio Travieso Rodríguez

      págs. 132-132

      

    • Investigation of Defects in Roll Contacts of Machine Elements with Acoustic Emission and Unsupervised Machine Learning

      Jonas Hillenbrand, J. Detroy, Jürgen Fleischer

      págs. 133-133

      

    • A Device to Reduce Positioning Errors Due to the Machine Tool Compliance

      Alvaro Noriega González, F.J. Campa

      págs. 134-134

      

    • Design of a Machine to Rectify Ceramic Tiles for Laboratory Tests

      Julio Serrano Mira, José Vicente Abellán Nebot, Gracia M. Bruscas

      págs. 135-135

      

    • Superfinishing Robotic Cell to Automate Belt Polishing Process on Critical Aeronautical Components

      Mikel González Esteban, A. Rodríguez, Octavio Manuel Pereira Neto, L. N. López de Lacalle Marcaide

      págs. 136-136

      

    • Control Strategies Comparison for a Multi-stage Assembly System Using Simulation

      Sergio Benavent Nácher, Pedro Rosado Castellano, Fernando Romero Subirón, José Vicente Abellán Nebot

      págs. 137-137

      

    • Design and Construction of a Test Bench for the Manufacture and Onmachine Non-contact Inspection of Parts Obtained by FFF

      Fernando Peña Cambón, C. Fernández, Gonzalo Valiño Riestra, Braulio José Álvarez Álvarez, José Carlos Rico Fernández

      • Texto completo

      págs. 138-138

      

    • Contact Image Sensor Integration in Fused Filament Fabrication Machines for Layer Inspection

      Fernando Peña Cambón, José Carlos Rico Fernández, Gonzalo Valiño Riestra, Pedro Fernández Álvarez, Victor Manuel Meana Díaz, Pablo Zapico García

      • Texto completo

      págs. 139-139

      

    • Topology Optimization and Additive Manufacturing Applied to a Camera Bracket for a 3U Cubesat

      M. Serrano, Ignacio González Requena, E.M. Andrés

      págs. 140-140

      

    • Machine-dynamics Monitoring for L-DED Operations

      Jon Iñaki Arrizubieta Arrate, José Exequel Ruiz Salas, Marta Ostolaza Gaztelupe, Eneko Ukar Arrien, Aitzol Lamikiz Mentxaka

      págs. 141-141

      

    • Finite Element Modelling and Evaluation of Mechanical Properties of Wood-PLA Parts Manufactured through Fused Filament Fabrication

      J. Durlan, B. Adrover, Jordi Llumà, Ramon Jerez Mesa, José Antonio Travieso Rodríguez

      págs. 142-142

      

    • Numerical Investigation of Deposition Strategies on the Residual Stress and Geometrical Deviation in Laser Metal Deposition

      M. Ghasempour, Daniel Gil Afonso, Ricardo Nuno de Oliveira Bastos Torcato

      págs. 143-143

      

    • Training Program for Researchers in Design and Manufacturing of Experimental Prototypes for Fluids Engineering Using Additive Technologies

      Luis Santamaría Bertolín, María Antonia García Prieto, A. Gharbi, Mónica Galdo Vega, Eduardo Blanco Marigorta, José Manuel Blanco Fernández, Sandra Velarde Suárez

      págs. 144-144

      

    • Re-design of a Component of a Lower-Limb Robotic Exoskeleton forIntegrating Sensing Capacity and Enhancing Multi-Material Direct Additive Manufacturing

      Joaquím Minguella Canela, P.R. Challa, María Antonia de los Santos i López, J. Lobo, José Font Teixido

      págs. 145-145

      

    • Product Development Methodology: Non-Quality Caused in Production byMistakes in Product Development, its Measurement and Improvement Integration in the Product Development Process

      Carolina Gracia Grijota, Raquel Acero Cacho, José Antonio Yagüe Fabra

      págs. 146-146

      

    • Design of a Conceptual Model for a Maintenance Object within a Producer: Impact on Distribution Network - a Simulation Case Study

      J. Gejo García, S. Gallego García, M. García

      págs. 147-147

      

    • Production Optimization Oriented to Value-Added: from Conceptual to aSimulation Case Study

      S. Pérez, M. García

      págs. 148-148

      

    • Fatigue Behaviour Analysis of AISI 316-L Parts Obtained by Machining Process and Additive Manufacturing

      Carolina Bermudo Gamboa, F.J. Trujillo, S. Martín, M. Herrera, Lorenzo Sevilla Hurtado

      págs. 149-149

      

    • Analysis of Residual Plastic Deformation of Blanked Sheets Out of Automotive Aluminium Alloys Through Hardness Maps

      G. Maculotti, S. Bonù, L. Bonù, R. Cagliero, G. Genta, G. Marchiandi, Maurizio Galetto

      págs. 150-150

      

    • Methodology to Estimate the Modules of Elasticity of Parts Manufactured by FFF/FDM Combining Finite Element Simulations and Experimental Tests

      V. Fernández, Amabel García Domínguez, Ana María Camacho López, J. Claver, Álvaro Rodríguez, Miguel Ángel Sebastián Pérez

      págs. 151-151

      

  • Factory of the future and Industry 4.0

    • Labour Productivity in Mixed-Model Manual Assembly 4.0

      A. Miqueo, M.M. Alcubierre, Marta Torralba Gracia, José Antonio Yagüe Fabra

      págs. 157-157

      

    • Insight into the Digital Innovation Hubs and their Role for the Industry 4.0 Knowledge Transfer

      Alberto Cotrino, Cristina González Gaya, Miguel Ángel Sebastián Pérez

      págs. 158-158

      

    • Preliminary Study of Augmented Reality Based Manufacturing for Further Integration of Quality Control 4.0 Supported by Metrology

      P. T. P. Ho, J. A. Albajez, José Antonio Yagüe Fabra, Jorge Santolaria Mazo

      págs. 159-159

      

    • Path Towards Embedding Industry 4.0 Paradigm – Digital Competence Overview in HEI: the Alto Minho Region Case Study

      Teresa Pereira, António Amaral, Luis Barreto

      págs. 160-160

      

    • Digital twin for the Integration of the Automatic Transport andManufacturing Processes

      A. Martínez, J. Díez, Paula Verde García, R. Ferrero, R. Álvarez, H. Pérez, Antonio Vizán Idoipe

      págs. 161-161

      

    • Development of Machine Learning Prediction Models for their Integration in aDigital Twin for a Tapered Roller Bearing Production Line

      Javier Dominguez Hernández, A. Esteban, J.A. Romeo, F. Cebrián, S. Santo Domingo, Juan José Aguilar Martín

      págs. 162-162

      

    • Modular and Flexible Automation Middleware Based on Labview and OPC UA

      Anne Künzel, A. Puchta, P. Gönnheimer, I. Heintzmann, Jürgen Fleischer

      págs. 163-163

      

    • An Approach for the Identification of Production Process Variables in Cross- Process Chain Production Processes like Battery Cell Production

      Andreas Aichele, K. Schäffer, Alexander Sauer

      págs. 164-164

      

    • Project Portfolio Risk Assessment in Digital Transformation: Challenges andOpportunities

      Camilo Andrés Micán Rincón, Gabriela Fernandes, Madalena Araújo, José Enrique Ares Gómez

      págs. 165-166

      

    • Maintenance Management and Optimization of the Thermoforming Process for the Agri-Food Industry Using the S2 Model

      Francisco Javier Álvarez García, David Rodríguez Salgado, Alfonso González González, O.L. Pérez, Francisco Romero Sánchez

      págs. 166-166

      

    • Productivity Tool for Automated Guided Vehicles: OEE Indicator Perspective

      L.C. Ng Corrales, María Pilar Lambán Castillo, Jesús Royo Sánchez, M.E. Hernández

      págs. 167-167

      

    • Cyber Physical Systems implementation to Develop a Smart Manufacturing

      Paula Morella, María Pilar Lambán Castillo, Jesús Royo Sánchez, J.C. Sánchez

      págs. 168-168

      

    • Design of a Conceptual Model for Manufacturing Companies within the 4th Industrial Revolution Applying the Viable System Model

      S. Gallego García, Manuel García García

      págs. 169-169

      

  • Manufacturing engineering in society

    • 3D Printed Surgical Planning Prototypes Manufactured by a Hybrid Multi-Material 3D Printer

      A. Tejo Otero, P. Lustig, Felip Fenollosa i Artés, Roger Uceda, Irene Buj Corral

      págs. 175-175

      

    • Study of Additive Manufacturing Techniques to Obtain Tactile Graphics

      Julio Serrano Mira, Gracia M. Bruscas, José Vicente Abellán Nebot, R. Lázaro

      págs. 176-176

      

    • Development of a Modular Kit to Improve DFA Learning

      Julio Serrano Mira, Sergio Benavent Nácher, Gracia M. Bruscas, José Vicente Abellán Nebot, Pedro Rosado Castellano, Fernando Romero Subirón

      págs. 177-177

      

    • Responding to Rapidly Changing Product Demand through a Coordinated Additive Manufacturing Production System: a COVID-19 Case Study

      M. Goudswaard, James Gopsill, A. Ma, Aydin Nassehi, Ben Hicks

      págs. 178-178

      

    • First Approach for the Optimization and Fabrication of a Customizable Stent Prototype by 3D Printing Technologies

      Juan Ivorra Martínez, L. Quiles Carrillo, Luis Compañy, N.J. Pérez, Teo Boronat Vitoria

      págs. 179-179

      

    • A Case Study of Re-Design for 3D Printing: Proposal to Replace MetallicFastening Elements in an Orthopedic Corset with 3D Printed PLA850Substitutes

      A. Cerro, F. Salinas, Pablo Romero Carrillo

      págs. 180-180

      

    • An Overview of the Additive Manufacturing Capabilities in the Development of Rehabilitation Products with Customized Elastic Properties

      Sergio de la Rosa Silva, Pedro Francisco Mayuet Ares, Lucía Rodríguez Parada

      págs. 181-181

      

    • Classification of Leading Indicators for the Dynamic Analyses of Emerging Risks in Integrated Management Systems for Quality, Environment, and Safety

      Francisco Brocal Fernández, Alberto Sánchez Lite, José Luis Fuentes Bargues, Miguel Ángel Sebastián Pérez, Cristina González Gaya

      págs. 182-182

      

    • Occupational Health and Safety Start at School of Engineering

      Magdalena Ramírez Peña, Andrés Pastor Fernández, Jose Enrique Díaz Vázquez, David Piñero Vega, Moisés Batista Ponce

      págs. 183-183

      

    • Safety Efficiency Value Stream Mapping (SEVSM): A new Tool to Support theImplementation of Lean Safety

      António Marqués, José Carlos Sá, F.J.G. Silva, Maria Teresa Ribeiro Pereira, L.P. Ferreira, Gabriel Santos

      págs. 184-184

      

    • Impact of the Current Production, Supply and Consumption Standards on theSustainable Development Goals

      H.J. Prado, Rosario Domingo Navas

      págs. 185-185

      

    • Sustainable and Advanced Manufacturing Processes of Light Structural Materials of the Transport Sector

      D. Blanco, E.M. Rubio, Marta Maria Marín Martín, A. M. Camacho

      págs. 186-186

      

    • Fused Deposition Modelling Process Environmental Performance through the Carbon Footprint Evaluation

      M.E. Hernández, María Pilar Lambán Castillo, J. A. Albajez, Jorge Santolaria Mazo, L.C. Ng Corrales, Jesús Royo Sánchez

      págs. 187-187

      

    • Evaluation of a Soft Skills Serious Game Educational Methodology in an Industrial Technical Training Program

      J. Mateo, José Antonio Yagüe Fabra

      págs. 188-188

      

    • Digital Skills Mentoring for Online Teaching and Evaluation in the Industrial Engineering Faculty of the University of Malaga

      M.M. Lozano, S. Martín, M. Herrera, María José Cano Iglesias, Lorenzo Sevilla Hurtado

      págs. 189-189

      

    • Design Learning: a Methodology for the Autonomous Design and Manufacture Customized Toys Based on Machine Learning

      Miguel Ángel Pardo Vicente, Lucía Rodríguez Parada, Pablo Pavón Domínguez

      págs. 190-190

      

    • Creation of a Virtual Museum as a Learning Tool in the Teaching of the Manufacturing Engineering Subject

      María Jesús Martín Sánchez, Francisco de Sales Martín Fernández, María José Cano Iglesias

      págs. 191-191

      

    • The teaching-learning process in specific engineering subjects through different technology-based teaching methodologies applied during the State of Alarm

      Óscar López Pérez, Francisco Javier Álvarez García, Alfonso González González, David Rodríguez Salgado, Justo García Sanz-Calcedo, Francisco Romero Sánchez

      págs. 192-192

      

    • Integrating BIM in Industrial Engineering Programs: A New Strategy Model

      Victor Manuel Meana Díaz, R. García, Antonio Bello García, Iñigo León Cascante, Sara Giganto Fernández

      págs. 193-193

      

    • Flipped Classroom and Gamification in Automated Manufacturing Lab Classes

      Victor Manuel Meana Díaz, José Carlos Rico Fernández, Gonzalo Valiño Riestra, Fernando Peña Cambón

      • Texto completo

      págs. 194-194

      

    • Performance Analysis of Teaching Methodologies Applied to Graduate Subjects on Risk Engineering and Management in Industrial Environments

      Álvaro Rodríguez, C. González, Miguel Ángel Sebastián Pérez

      págs. 195-195

      

    • Design and Fabrication of Prototype of Extrusion Equipment for Research and Teaching Purposes

      A. M. Camacho, Beatriz de Agustina Tejerizo, A. Pérez, Marta Maria Marín Martín, E.M. Rubio

      págs. 196-196

      

    • Historical-technological Study, Modeling and Reconstruction to Scale of the Six-Cylinder Pump of Taqī ad-Dîn

      R. López García, I.M. Cabeza, Rubén Dorado Vicente, G. Medina Sanchez

      págs. 197-197

      

    • Sugar Cane Industrial Heritage in Oriental Coast of Malaga: A Tourist Route Opportunity

      S. Martín, F.J. Trujillo, C. Bermudo, J. Claver, Miguel Ángel Sebastián Pérez, Lorenzo Sevilla Hurtado

      págs. 198-198

      

    • Impact of Technological Facilitators in the Design and Artisanal Production Processes: The Guarda Ninhos Project – Craft and Design of Gonçalo’sBasketry

      Sergio Lemos, B. Alexandre, José Enrique Ares Gómez

      págs. 199-199

      

    • A Methodology for Early Detection of Potentially Low-Achievement Students by Means of On-Line Testing and Item Response Theory

      David Blanco Fernández, Fernando Sánchez Lasheras, Braulio José Álvarez Álvarez, Pedro Fernández Álvarez, Natalia Beltrán Delgado

      págs. 200-200