Drying parameters influence on ‘Ameclyae’ Opuntia ficus pricklypear oil quality

• L. Hassini ^[2] ; H. Desmorieux ^[1]
  1. [1] Claude Bernard University Lyon 1

     Claude Bernard University Lyon 1

     Arrondissement de Lyon, Francia

     
  2. [2] University of Tunis El Manar
• Localización: IDS2018. 21st International Drying Symposium. Proceedings / Gabriela Clemente Polo (aut.), Juan Andrés Carcel Carrión (aut.), Antoni Mulet Pons (aut.), 2018, ISBN 978-84-9048-688-7, pág. 1115
• Idioma: inglés
• Enlaces
  • Texto completo
• Resumen

  • The aim of this work is to study the effects of drying conditions on the quality of extracted pricly pear seed oil, specifically α-tocopherol content. Drying experiments were carried on following a full 23 factorial design using avertical drying tunnel. The temperature range was 45 to 70°C, relative humidity range was 15 - 30% and air velocity was 1 and 2 m/s. The Midilli-Kucuk model was found with satisfaction describing the seed air drying curves with a correlation coefficient of 0.999 and a standard error of 0.01.For each drying condition, the extraction of fixed oil seeds was performed at cold using mechanical pressing method. The oil quality was evaluated on the basis of theα-tocopherol content. Theα-tocopherol was identified and quantified by high-performance liquid chromatography (HPLC-UV). According to the experimental results, it was found that convective drying of thin layer of seeds at soft air conditions, drying temperature of 45°C, relative humidity of 15% and air velocity of 1m/s give the optimal quality of extracted oil in terms of α-tocopherol content.