Valorisation of rice straw by obtaining active compounds and cellulosic materials for the development of biodegradable food packaging systems
- Autores: Pedro Augusto Vieira de Freitas
- Directores de la Tesis: María Consuelo González Martínez (dir. tes.), Amparo Chiralt Boix (dir. tes.)
- Lectura: En la Universitat Politècnica de València ( España ) en 2022
- Idioma: español
- Tribunal Calificador de la Tesis: Luis Cabedo Mas (presid.), Lorena Atarés Huerta (secret.), Juan Ignacio Maté Caballero (voc.)
- Programa de doctorado: Programa de Doctorado en Ciencia, Tecnología y Gestión Alimentaria por la Universitat Politècnica de València
- Materias:
- Enlaces
- Tesis en acceso abierto en: RiuNet
- Resumen
This Doctoral thesis focused on obtaining cellulosic fractions and bioactive extracts from rice straw (RS) by applying different extraction and purification techniques, using water as a green solvent. These fractions were incorporated into starch and poly (lactic acid) (PLA)-based films, as well as into starch-PLA bilayers, to obtain active packaging materials useful for extending the shelf life of different food matrices. The extracts obtained by applying a combined ultrasound-reflux heating method (USHT) and subcritical water extraction (SWE) (at 160 °C (SWE-160) and 180 °C (SWE-180)) exhibited high phenolic content (37, 51, 83 mg GAE.g-1 dry extract, respectively) and antioxidant activity (6.3, 2.0, and 1.2 mg dry extract.mg-1 DPPH, respectively). The SWE extracts showed antibacterial activity against L. innocua and E. coli. Cellulose fibres (CF) were isolated from the extraction insoluble fractions and compared with those obtained from the traditional alkaline method. Despite slight differences in the degree of purification, the new methods gave rise to CFs with higher yields than the alkaline method (35-39% vs. 29%), with similar crystallinity (60-69%), thermal behaviour, and aspect ratios.
USHT fibres were incorporated into corn starch (1, 3, and 5% wt.), and corn starch-modified by heat treatment, obtained by thermoprocessing. The incorporation of CF at 3% gave rise to films with the best functional properties. When active extracts were incorporated at different ratios (4, 6, and 8% wt.) into the starch matrix, with or without CF (3%), the films were more stretchable and less resistant, but with higher oxygen barrier capacity. Likewise, mono-dose bags of these active and reinforced films effectively reduced the oxidation of packed sunflower oil.
Active, plasticised PLA films were produced, incorporating USHT extract (2, 4, and 6% wt.) by thermoprocessing, which exhibited colour and slightly worsened tensile behaviour, but with higher oxygen barrier capacity. The release kinetics of the incorporated antioxidant compounds in food simulants of different polarity (A: aqueous products; and D1: oil-in-water systems) showed that films containing 6% of extract delivered similar antioxidant capacity regardless of the food simulant polarity.
Biodegradable bilayers were obtained by laminating plasticised PLA, with and without USHT extract (6%), and thermoplastic starch, with or without USHT CFs (3%). The bilayers exhibited improved overall barrier capacity with respect to the monolayers. However, the interlayer compound migration led to less stiff and resistant films with respect to that expected from the PLA film contribution. The active and reinforced bilayers were able to extend the shelf life of the packed pork meat during cold storage.
PLA films with 6% wt. of the different extracts (USHT, SWE-160, and SWE-180) were produced, which exhibited lower mechanical resistance and water vapour barrier capacity, but improved oxygen barrier capacity and intense UV light-blocking effect. Furthermore, the active PLA films, especially with SWE-180 extract, extended the shelf life of cold storage pork meat.
The CFs obtained with the different purification methods were also used to produce cellulose aerogels. The differences in the chemical composition of the CFs affected the aerogels' microstructure. The water absorption and retention capacity of the aerogels were within the previously reported ranges for this type of material.
Thus, it was possible to obtain valorised fractions of rice straw, active extracts and cellulosic fibres, useful in developing active biodegradable materials based on starch and PLA. Further studies are needed to validate the food safety of the materials, as well as for developing other applications in the food or pharmaceutical industry.
