Información General

• Autores: Santiago Hernández (ed. lit.), Carlos A. Brebbia, Willy Patrick De Wilde
• Editores: WIT Press
• Año de publicación: 2017
• País: Reino Unido
• Idioma: inglés
• ISBN: 9781784661434
• Texto completo no disponible (Saber más ...)

Resumen

• Containing papers from the 2nd High Performance Design of Structures and Materials and the Optimum Design of Structures conference, this book will be of interest to those in any engineering field.

  The use of novel materials and new structural concepts nowadays is not restricted to highly technical areas like aerospace, aeronautical applications or the automotive industry, but affects all engineering fields including those such as civil engineering and architecture.

  Most high performance structures require the development of a generation of new higher performance sustainable materials, which can more easily resist a range of external stimuli or react in a non-conventional manner. Emphasis is placed on intelligent structures and materials as well as the application of computational methods for their modelling, control and management.

  Optimisation techniques have much to offer to those involved in the design of new industrial products. The development of new algorithms and the appearance of powerful commercial computer codes with easy to use graphical interfaces have created a fertile field for the incorporation of optimisation into the design process in all engineering disciplines.

Otros catálogos

• Red de Bibliotecas Universitarias (REBIUN)

Listado de artículos

• • The role of surrogate models in combined aeroelastic and structural optimization of cable-stayed bridges with single box deck

    Miguel Cid Montoya, Santiago Hernández, Ibuki Kusano, Félix Nieto Mouronte, José Ángel Jurado Albarracín

    • Resumen

    págs. 1-15

    

  • Heuristic design of a precast-prestressed concrete U-beam and post-tensioned cast-in-place concrete slab road bridges

    J. V. Martí, J. Alcalá, T. García Segura, Víctor Yepes Piqueras

    págs. 17-28

    

  • Optimum size, position and number of cables in cable-stayed bridges

    Clara Cid Bengoa, Aitor Baldomir, Santiago Hernández, Miguel Cid Montoya

    • Resumen

    págs. 29-40

    

  • Sizing optimization for industrial applications and best practice design process

    N. Gerzen, P.M. Clausen, C.B.W. Pedersen

    págs. 41-50

    

  • Second-order analysis of a steel truss structure for the Hydropower Plant Dravograd

    S. Kravanja

    págs. 51-62

    

  • Behaviour of cement composites with ceramic fibres exposed to higher temperatures

    M. Cáchová, D. Konáková, E. Vejmelkokvá, J. Kot'átková, R. Cerny

    págs. 63-72

    

  • Estimate of rigidity of greenhouses made of steel pipes

    M. Ban, T. Hira, S. Ouchi, K. Imanishi, H. Nomura, S. Enoki

    págs. 73-80

    

  • Structural robustness assessment of corroded buried pipes

    A.U. Ebenuwa, K. F. Tee, Y. Zhang

    págs. 81-92

    

  • Analysis of parameters influencing the jamming effect in circular braids

    J. Ochola, B. Malengier, J. Githaiga, L. VanLangenhove

    págs. 93-102

    

  • Effect of friction on material behaviour in non-equal channel multi angular extrusion (NECMAE)

    M.S. El-Asfoury, M.N.A. Nasr, A. Abdel-Moneim

    págs. 103-114

    

  • A numerical model of a prestressed concrete girder

    M. Galic, P. Marovic, I. Ravlic

    págs. 115-128

    

  • Enforcing periodic boundary conditions on general finite element discretisations of heterogeneous materials

    A.I. Akpoyomare, M.I. Okereke, M.S. Bingley

    págs. 129-142

    

  • An investigation of an air-abrasive flow influence on the dynamics of blade steels erosion

    A.B. Tkhabibimov, L.I. Seleznev, A.F. Mednikov

    págs. 143-152

    

  • Improvement in toughness of semi-solid light metal by the ECAP process

    T. Kitazumi, K. Natori, T. Tanaka

    págs. 153-162

    

  • Experimental characterization and numerical modeling of the three-dimensional anisotropic behavior of a thick sheet aluminum alloy AA2024-T351 using multi-scale approaches

    W. Nasri, A. Gavrus, A. Kouadri-David, K. Sai

    págs. 163-178

    

  • Ballistic resistance of various materials suitable for indoor bullet traps

    F. Tikal, S. Spirk

    págs. 179-190

    

  • Tool wear of sintered cubic boron nitride compact in cutting hardened steel with high-pressure coolant supplied

    T. Wada, K. Okayama, Y. Morigo

    págs. 191-200

    

  • A review on the effect of surface finish and cooling rate on solder joint reliability

    K. Hardinnawirda, A.M. Zetty Akhtar, I. Siti Rabiatull Aisha, I. Mahadzhir

    págs. 201-212

    

  • The effect of ER4043 and ER5356 filler metal on welded A1 7075 by metal inert gas welding

    M.N.M Salleh, M. Ishak, L.H. Shah, S.R.A. Idris

    págs. 213-224

    

  • Experimental investigation on the dynamic compressive characteristics of tungsten-fibre/Zr-based BMGC

    G. Chen, X. Chen

    págs. 225-234

    

  • On the mechanism of deformation localization and homogeneous flow in bulk metallic glasses

    J. C. Li, X.W. Chen, F.-L. Huang

    págs. 235-244

    

  • Finite element models for laminated glass units with viscoelastic interlayer for dynamic analysis

    T. Janda, A. Zemanová, J. Zeman, M Sejnoha

    págs. 245-254

    

  • Study of optimum shape and strenght design of the redesigned Zig-Zag chair

    T. Mori, Y. Ohbuchi, H. Iida, K. Tsukamoto, Y. Nakamura, H. Sakamoto

    págs. 255-264

    

  • Using hooked-end fibres on high performance steel fibre reinforced concrete

    Y. Gündüz, E. Taskan, Y. Sahin

    págs. 265-276

    

  • Residual flexural property of water absorbed CFRP during thermal cycling

    H. Katogi, K. Takemura, N. Iijima

    págs. 277-286

    

  • Effects of preheating temperature on the interfacial tensile strength for glass fiber reinforced polypropylene composites made by press and injection hybrid molding

    K. Tanaka, R. Noguchi, T. Katayama

    págs. 287-296

    

  • Diaphragm molding analysis of GFRTP using the finit element method

    K. Tanaka, M. Ogawa, T. Katayama, H. Sakamoto

    págs. 297-306

    

  • The effect of molding pressure on the mechanical properties of CFRTP using the paper-type intermediate material

    K. Tanaka, T. Yamada, K. Moriito, T. Katayama

    págs. 307-316

    

  • Effect of mold temperature on interfacial welded strength and outer shell laminate strength of CF/PA6 composites manufactured by press and injection hybrid molding

    K. Tanaka, Y. Kondo, T. Katayama

    págs. 317-328

    

  • Effects of PP modification and processing time on fiber/matrix interfacial strength for carbon fiber reinforced polypropylene

    K. Tanaka, K. Ohno, T. Katayama

    págs. 329-334

    

  • Mechanical characterisation of nanocellulose composites after structural modification

    H. Takagi, A.N. Nakagaito, K. Nishimura, T. Matsui

    págs. 335-342

    

  • Fatigue property of natural fiber after alkali treatment

    H. Katogi, K. Takemura, R. Sebori

    págs. 343-350

    

  • Influence of holding time and pressure on tensile shear strength of resistance welded CFRTP

    K. Tanaka, K. Okada, T. Katayama

    págs. 351-360

    

  • Influence of water absorption on the fiber/matrix interfacial shear strength of glass fiber reinforced degradation controlled PLA model composite

    K. Tanaka, A. Inagaki, M. Miyamura, T. Katayama, S. Yoshikawa, T. Katayama

    págs. 361-370

    

  • Fabrication of hydroxypatite/PLA composite nanofiber by electrospinning

    K. Tanaka, T. Shiga, T. Katayama

    págs. 371-380

    

  • FEM analysis of temperature distribution of flat type mold for CFRTP thermoforming with direct resistance heating

    K. Tanaka, M. Tanaka, R. Sue, T. Katayama, H. Kuwahara

    págs. 381-390

    

  • Friction stir spot welding of CFRP and aluminum alloy with thermoplastic adhesive

    K. Tanaka, T. Teramura, T. Katayama, K. Nishiguchi

    págs. 391-402

    

  • Study of friction and abrasion properties of wood plastic composites

    K. Araki, G. Hamabe, Y. Sano, T. Kume, T. Tanaka

    págs. 403-414

    

  • Digital fabrication strategies for timber thin-walled sections

    Y. Al-Qaryouti, Joseph M. Gattas, R. Shi, L. McCann

    págs. 415-426

    

  • Analytical calculation model for determining the cycle time in injection molding parts applied to design optimization algorithms

    Jorge Manuel Mercado Colmenero, M.A. Almazán Lázaro, Cristina Martín Doñate, Miguel Ángel Rubio Paramio, Antonio Vizán Idoipe, J.M. Pérez García, J.J. Márquez Sevillano, D. Aguilera Puerto

    págs. 427-438

    

  • Production of high quality coatings on light alloys using Plasma Electrolytic Oxidation (PEO)

    R.O. Hussein, X. Nie, D.O. Northwood

    págs. 439-454

    

  • Contact analysis and surface optimization of crowning gear coupling

    J. Wei, Y. Yao, K. Zhang

    págs. 455-466

    

  • Contact mechanical problem for arbitrary 3D loading histories

    V.V. Aleshin, O. Bou Matar

    págs. 467-478

    

  • Effects of polishing treatment and chemical bath deposited magnesium sulphide (MgS) thin films on ferritic stainless steel 430

    P. Akinyemi, O.L. Ojo, O.T. Kolebaje, C.I. Abiodun

    págs. 479-486

    

  • An investigation of ion-plasma coatings solid particle erosion resistance at high-speed impact of gas-abrasive flow

    A.F. Mednikov, G.V. Kachalin, A.V. Ryzhenkov, A.B. Tkhabibimov

    págs. 487-498

    

  • Numerical simulation of tribosystems of the high-force diesel engine taking into account the rheological characteristics of a lubricant

    K. Gravrilov, E. Zadorozhnaya, A. Doikin

    págs. 499-508

    

  • Tribological behavior of PTFE based single layer and double layer fabric composites

    H.L. Li, Z.W. Yin, D. Jiang, L.Y. Jin, Y.Q. Cui, J. Cao

    págs. 509-520