Resumen de Experimental and finite element analysis of utilizing rectangular and trapezoidal piezoelectric energy harvester with arrays of auxetic cells

Mohsen Maleki, Seyed Houssein Dibajian, Abbas Rohani Bastami, Majid Rajabi

• Present study develops the experimental and finite element analysis of an auxetic piezoelectric energy harvester consisting of a cantilever, auxetic substrate, and piezoelectric layer. Firstly, five auxetic models with 1, 4, 9, 16, and 25 honeycomb auxetic cells are presented. Harvested power and stress distribution of the piezoelectric layer for these models are compared with plain piezoelectric energy harvester. All the analysis has been performed using the experimental tests and finite element method. Mesh size sensitivity analysis of the finite element model is presented, and it is verified by previous experimental studies. The model with 25 auxetic cells harvests more power than other models. Furthermore, comparing stress distribution on the piezoelectric layer of these models indicates that increasing the number of auxetic cells leads to increasing the average stress on the piezoelectric layer. The present investigation illustrates that harvested power of an auxetic energy harvester in resonant frequency could improve to twenty times more than a plain harvester. Besides, the new auxetic model with trapezoidal geometry is presented in the present paper. Utilizing this model as the substrate in a piezoelectric energy harvester leads to increasing the efficiency of the energy harvester by 82.5%. The damping ratio of the auxetic energy harvester has been measured by experimental investigation. Also, experimental analysis has been performed to find the optimum energy harvester circuit resistor. The density of the harvested power for the trapezoidal energy harvester with an optimum circuit resistor is 107% more than the rectangular energy harvester.