I. INTRODUCTIONThe Parshall Flume, which was invented in 1920 by R. Parshall, is mostly used in wastewater and crop supply. Utilizing equations, Parshall established dimensions that fit the design, one of the advantages is the conversion of position energy to velocity energy since in other measurement structures there are minimum energy losses in this one it does not allow sedimentation.
The structuring of the project is adhered to by different models that define its behavior and limit its use. This is the case of an approach length of the channel entrance, which is nothing more than a primary distance for the action of the flow within the channel. Throughout history, some studies were conducted in an attempt to establish an approximate and realistic value of the length at the time of measurements, but the theories put forward were lost. Some people link this length with the narrowing of the gorge, and others suggest flow conditions before entering the flume.
For the development of the project established with its respective objectives, the respective structuring was carried out: For the measurement, the points already established in the field will be taken with the help of a total station, GPS, to verify the respective measurements of the Parshall flume. For the calculations and the design, the points will be introduced in the civil 3D to be able to verify if the points taken are the correct ones and what distances they have between them, through this, we can apply different methods to be able to verify the design that has this Parshall flume. For the evaluation and layout of the gutter, if it is the case, we will carry out a layout in plan with the data already calculated in the office and we will evaluate the situation in which it is so that we can apply a possible solution so that a defect does not occur.
In this report, we focus on the design and redesign of a hydraulic irrigation channel where we find a Parshall section, which has the function of measuring the flow found in that section. The measurements found in the field can be verified in the office using formulas and software to verify if the data are correct, if so we can say that it is well designed, otherwise we will look for a possible solution by doing a field study.
© 2001-2024 Fundación Dialnet · Todos los derechos reservados