Structural analyses of wooden chairs by finite element method (FEM) and assessment of the cyclic loading performance in comparison with allowable design loads

• Erkan Ceylan ^[1] ; Ersan Güray ^[2] ; Ali Kasal ^[3]
  1. [1] Bingöl University

     Bingöl University

     Turquía

     
  2. [2] Muğla Sıtkı Koçman University.Faculty of Engineering. Department of Civil Engineering. Muğla, Turkey
  3. [3] Muğla Sıtkı Koçman University. Faculty of Technology. Department of Woodworking Industrial Engineering. Muğla, Turkey

  Mostrar afiliaciones +
• Localización: Maderas: Ciencia y tecnología, ISSN 0717-3644, ISSN-e 0718-221X, Vol. 23, Nº. 1, 2021
• Idioma: inglés
• Enlaces
  • Texto completo (pdf)
• Resumen

  • Tests were carried out to investigate the cyclic loading performance of chairs constructed of Scotch pine (Pinus sylvestris) and Oriental beech (Fagus orientalis). Totally, 30 real size chairs were constructed and assembled with polyvinyl acetate adhesive. Chairs were tested under 3 cyclic loading directions; namely, front to back, back to front, and backrest according to American Library Association specifications, and obtained loading performances of chairs were crosschecked with allowable design load levels that were specified in American Library Association. Additionally, specimens were analyzed as structures by using finite element method in order to obtain axial, shear, and bending stresses acting on each member under loadings and compare to these values with design stresses. As a result, it was concluded that finite element method analyses achieves reasonable estimates for strength performances and failure behaviors of chairs. Depending on allowable design loads by American Library Association; chairs constructed of beech could meet the medium service for front to back and back to front loading, while heavy service for backrest loading. In the case of pine chairs; they could meet the medium service for front to back and back to front loading, while light service for backrest loading