Se evaluó la influencia de la agitación sobre la producción de biomasa en un fotobiorreactor (FBR) panel plano mediante la modificación de los aspersores en el difusor. La evaluación se realizó mediante la elaboración de 3 difusores con diámetros de aspersor diferentes (1, 2 y 4 mm). A través de un análisis de varianza ANOVA y una prueba t, se seleccionaron los diámetros de 1 y 2 mm para ingresar dióxido de carbono (CO2), obteniendo una tasa de crecimiento de 0,37 días -1 y 0,35 días -1, respectivamente. El análisis indicó que a menor diámetro de aspersor en el difusor mayor tasa de crecimiento. Mediante el planteamiento de las ecuaciones de transferencia de masa se verificó que la disminución del tamaño de la burbuja promueve la transferencia entre las fases gas-líquido.
The influence of agitation on the production of biomass in a flat panel photobioreactor was evaluated by modifying the sprinklers in the diffuser. The evaluation was carried out through the elaboration of 3 diffusers with different sprinkler diameters (1, 2, and 4 mm). The sprinklers with diameters of 1 and 2 mm were selected for the entry of carbon dioxide (CO2) via ANOVA and t-test, obtaining a growth rate of 0.37 days-1 and 0.35 days-1, respectively. The analysis showed that the smaller diameter of the sprinkler in the diffuser, the higher the growth rate. Besides, by considering the mass transfer equations it was verified that the decrease in the size of the bubble promotes the transfer within the gas-liquid phases.
© 2001-2024 Fundación Dialnet · Todos los derechos reservados