Ayuda
Ir al contenido

Dialnet


Preparation and mechanical properties of Nanoclay-MWCNT/Epoxy hybrid nanocomposites

    1. [1] Teerthanker Mahaveer University

      Teerthanker Mahaveer University

      India

  • Localización: Journal of Applied Research in Technology & Engineering, ISSN-e 2695-8821, Vol. 2, Nº. 1, 2021, págs. 17-21
  • Idioma: inglés
  • Enlaces
  • Resumen
    • Among the various kinds of reinforcing element, Multi Wall Carbon Nano-tubes (MWCNT) and Nanoclay have found much more attention as a filler element to upgrade the mechanical properties of polymer composite material. In this paper, production of hybrid nanocomposites and the effect of MWCNT and nanoclay on mechanical properties of hybrid nanocomposites have been evaluated. In hybrid nanocomposites, MWCNT and nanoclay are embedded in epoxy resin. The processing of hybrid nanocomposite is always been a difficult task for researcher to prepare defects free samples. Here, the processing of Epoxy/Nanoclay-MWCNT hybrid composites has been done by using homogenizer and ultrasonic techniques for complete dispersion of nanoparticles into epoxy resin. The MWCNT and nanoclay were embedded into epoxy resin in different weight fractions and mixtures were used for tensile test and hardness specimen production. The tensile modulus and tensile strength values have been calculated via tensile tests. The test result shows that tensile modulus of samples increases as the filler content increase up to certain extent but then start decreasing. Also the elongation reduces as the filler content rises in the epoxy which shows the brittleness present in the samples. Rockwell hardness on B-scale was conducted on Nanocomposite samples and found that increasing the filler content excessively does not improve hardness as much.


Fundación Dialnet

Dialnet Plus

  • Más información sobre Dialnet Plus

Opciones de compartir

Opciones de entorno