Ayuda
Ir al contenido

Dialnet


Resumen de Correlation between Permeability and Porosity for Pervious Concrete

Gersson F. B. Sandoval, Isaac Galobardes, Nicole Schwantes Cezario, André Campos, Berenice Martins Toralles

  • español

    El objetivo de este estudio fue proponer una correlación para los parámetros hidráulicos del concreto permeable (CoPe). Para esto, se utilizaron 3 agregados de residuos de construcción civil y 1 agregado de basalto como referencia para producir CoPe. La relación 1: 3.26(cemento: agregado) se trabajó en todas las mezclas, una relación a/c de 0.34. Se realizaron pruebas de resistencia a la compresión y resistencia a la flexión para caracterizar mecánicamente el concreto producido y verificar el cumplimiento con los estándares ACI 522R-10, NBR 16416 (2015) y VTT-R-080225-13. También se llevaron a cabo pruebas de porosidad y permeabilidad a carga constante para estudiar las propiedades hidráulicas del material. Los resultados indican que es factible producir concreto permeable con agregados sostenibles que cumplan con los estándares y que se podría usar en la construcción de calzadas. Por otro lado, se propone una correlación de permeabilidad y porosidad que involucra las leyes de Bernoulli y Darcy y establece las condiciones de contorno en las que funcionan estas dos propiedades, teniendo como conclusión una ecuación exponencial que caracteriza la eficiencia hidráulica de los canales internos del material relacionado. A la interconexión de poros. Al realizar la regresión no lineal, la ecuación se ajusta a los resultados encontrados y se ajusta a lo que se encuentra en la literatura, siendo una herramienta excelente para identificar la eficiencia hidráulica del material.

  • English

    The aim of this study was to propose a correlation for the hydraulic parameters of pervious concrete (PC). Thus, three aggregates from civil construction waste and one basalt aggregate (reference) were used to produce PC. The ratio c/a (cement: aggregate) 1:3.26 and a w/c ratio of 0.34 were used in all mixtures. Compressive and flexure tensile strength tests were performed to mechanically characterize the mixtures produced, whereas porosity and constant head permeability tests were also carried out to assess the material hydraulic properties.

    Firstly, the experimental results were compared with the requirements established in international guidelines (ACI 522R-10, NBR 16416 (2015) and VTT-R-080225-13). The results complied with the guidelines indicating it is feasible to produce pervious concretes with the sustainable aggregates used in the study in low structural applications such as walkways. On the other hand, a correlation between permeability and porosity was proposed based on Darcy’s and Bernoulli’s laws. The proposed equation, obtained by means of a non-linear regression, is an exponential equation that characterizes the hydraulic efficiency of the internal channels of the material considering the pores interconnection. The correlation between porosity and permeability was finally validated using results from the literature showing the same trend found in laboratory, and therefore it was demonstrated that the proposed correlation in an efficient tool to predict the hydraulic efficiency of pervious concrete


Fundación Dialnet

Dialnet Plus

  • Más información sobre Dialnet Plus