Ayuda
Ir al contenido

Dialnet


Influencia del biodiésel de aceite de fritura usado, sobre las emisiones: índice de opacidad

    1. [1] Universidad Tecnológica del Perú

      Universidad Tecnológica del Perú

      Perú

  • Localización: Tecnura: Tecnología y Cultura Afirmando el Conocimiento, ISSN-e 2248-7638, ISSN 0123-921X, Vol. 23, Nº. 59, 2019 (Ejemplar dedicado a: January - March), págs. 60-67
  • Idioma: español
  • Títulos paralelos:
    • Influence of biodiesel made from waste cooking oil on emissions: opacity index
  • Enlaces
  • Resumen
    • español

      Contexto: Entre las fuentes de biodiésel, el aceite de fritura usado es un potencial combustible alternativo para reducir las emisiones de efecto invernadero de los motores diésel sin modificaciones tecnológicas considerables.

      Método: Los experimentos se realizaron en condiciones estables, en un motor diésel de un cilindro de cuatro tiempos, mediante tres mezclas de combustible diésel puro con biodiésel obtenido de aceite de fritura usado (B10, B20 y B30) y combustible diésel comercial B5. El motor funcionó a velocidades variables entre 1000 - 1600 r.p.m., a plena carga y cargas variables del motor correspondientes a la potencia efectiva a 1600 r.p.m.

      Resultados: Los resultados experimentales muestran que el índice de opacidad de B10, B20 y B30 a 1600 r.p.m., con velocidad nominal 1600 r.p.m. del motor a carga constante fue menor comparado con el combustible comercial B5 en 0,3 %, 24 % y 46 %, respectivamente. Sin embargo, al incrementar la carga del motor a velocidad constante de 1600 rpm, el índice de opacidad alcanzó su máximo valor para B20 comparado con los otros combustibles utilizados.

      Conclusiones: Es viable el uso de biodiésel de aceite de fritura usado en mezclas con diésel puro y comercial para disminuir las emisiones tóxicas, como el material particulado (hollín) de los motores diésel en el medio ambiente. Por tanto, la reutilización de dicho aceite disminuye significativamente los problemas medioambientales.

    • English

      Context: Among the sources of biodiesel, waste cooking oil is a potential alternative fuel to reduce the emission of greenhouse gases from diesel engines without considerable technological changes.

      Method:  In this study, the experiments were performed under stable conditions on a single-cylinder four-stroke diesel engine using three different blends of pure diesel fuel with biodiesel made from waste cooking oil (B10, B20 and B30) and commercial diesel fuel B5. The engine ran at variable speed between 1000 - 1600 rpm, at full load and variable engine loads corresponding to the effective power at 1600 rpm.

      Results: The experimental results show that smoke opacity of B10, B20, and B30 is lower compared to the commercial B5 at 0.3%, 24% and 46% respectively, when evaluated at nominal speed 1600 rpm and at full load. However, by increasing the engine load at a constant speed of 1600 rpm, smoke opacity reached its maximum value with B20 compared to other fuels used.

      Conclusions: It is feasible to use biodiesel made with waste cooking oil in blends with pure and commercial diesel to reduce the effects of toxic emissions such as particulate matter (soot) of diesel engines on the environment. Therefore, recycling waste cooking oil significantly reduces environmental problems.


Fundación Dialnet

Dialnet Plus

  • Más información sobre Dialnet Plus

Opciones de compartir

Opciones de entorno