Abstract In three-dimensional integrated circuits (3DICs) aggressive wafer-thinning can lead to large thermal gradients, including spikes in individual device temperatures. In a non-thinned circuit, the large bulk silicon wafer on which devices are built works as a very good thermal conductor, enabling heat to diffuse laterally. In this paper we experimentally examine the thermal resistance from an active on-chip heater to the heatsink in a two-tier bump-bonded 3D stacked system. A simplified structure is introduced to enable such measurements without the time and cost associated with the full fabrication of such a system. Die thinning is seen to have a pronounced effect on the thermal response, which can adversely affect system reliability. Thinning the top tier from 725 μm to 20 μm resulted in a nearly 4 times increase in the normalized temperature rise of the heater of our test chip.
© 2001-2024 Fundación Dialnet · Todos los derechos reservados