Resumen de Deformation and warping of the bracket slot in select self-ligating orthodontic brackets due to an applied third order torque
Objective: To measure the plastic deformation of three different self-ligated brackets as a result of third order torque by analysing slot dimensions and determine its impact on torque play.
Methods: Three different self-ligating orthodontic brackets (0·022-inch slot) were investigated: Damon Q®, In-Ovation R®, and Speed® (30 per group). A digital SLR camera coupled to a microscope was used to capture images of the slot profile of each bracket before and after torquing. Each bracket was torqued to 63° in the same manner using a 0·019×0·025-inch SS wire.
Results: The mean change in slot height as measured at the top of the slot was 0·013 mm (SD 0·020), 0·007 mm (SD 0·010) and 0·070 mm (SD 0·03) for Damon Q®, In-Ovation R® and Speed®, respectively. Slot taper increased 0·75° (SD 0·96), 0·41° (SD 1·05) and 9·30° (SD 4·24), respectively. Increase in torque play was calculated to be 0·9, 0·6 and 7·7° respectively, as calculated using the novel formula presented in this study.
Conclusions: Damon Q® and In-Ovation R® maintain high levels of linearity in the shape of the slot walls and experience small, but significant amounts of plastic deformation that are physically insignificant. Speed® demonstrates the most plastic deformation with visually identifiable warping in the bracket slot.
