Resumen de Styrene degradation in perlite biofilter: the overall performance characteristics and dynamic response
Martin Halecky, Jan Paca, Andrew Mark Gerrard, C. R. Soccol
Styrene�s degradation in a perlite biofilter including the long-term operation, dynamic response to step-changes in inlet concentration and non-use periods were tested. The study was performed in a bench-scale biofilter with ID 100 mm and a bed height of 1 m. Perlite with a particle size of 2 � 4 mm was used as a packing material. An enrichment mixed culture was immobilized on the packing. The inoculum was obtained from a styrene biofilter. Two different loading conditions were tested: (1) Loading with a high inlet concentration and a high residence time. (2) Loading with a low inlet concentration and the low residence time. Both conditions are common in industrial practice. The dynamic response to a repeated step-change in the inlet concentration (from 50 to 200 mg.m-3) was tested. The dynamic behaviour of the restarting period after varying periods of non-use was also investigated. The results demonstrate a high biofilter stability under extreme loading conditions and also during the step-changes of the inlet concentration. The non-use periods tested had almost no effect on the biofilter performance. The maximum outlet concentration after the restarting of the load was 4 mg.m-3, when a 95 hours idle period was used. After shorter idle periods, the outlet styrene concentrations did not exceed 0.6 mg.m-3.
