Static and dynamic analysis of wind turbine blades using the finite element method

• Autores: N.M. El Chazly
• Localización: Renewable energy, ISSN 0960-1481, Vol. 3, Nº 6, 1993, pág. 705
• Idioma: inglés
• Texto completo no disponible (Saber más ...)
• Resumen

  • Analysis of forces and stresses of horizontal axis propellers and turbines has an increased interest in recent years, because of the need to develop adequate analytical tools for the design and evaluation of wind turbines rotors.

    Most of the structure failures of wind turbines occur in the blade root section. Hence, a three dimensional analytical model to compute the deflection, stresses, and eigen values in the rotor blades is proposed using bending triangular plate finite element.

    Both membrane and bending stiffness are considered in deriving the element stiffness matrix. The consistent mass matrix are used in generating the overall mass matrix. Lift and drag forces created in a steady wind conditions are analyzed as normal and tangential forces on the blade sections at certain angle of attack. These forces are applied as boundary loads to the computer program to analyze statically and dynamically rotor baldes of symmetrical aerofoil NACA 0015 series. Constant chord, tapered blades and twisted ones have been analyzed at rated and survival wind speeds.

    The validity of the computer program used was verified by applying it to a standard cantilever box beam using the beam theory.

    The results showed that maximum stresses occurred at the root of the blades for all configurations in the spanwise direction and that tapered blade, in addition to saving material weight, diminished the stresses obtained. The twisting of the blade lead to the increase of the stiffness and the decrease of the stresses.