Se estudió el comportamiento de los parámetros tecnológicos, de diseño y funcionamiento de la instalación semi-industrial de hidrotransporte de la Universidad de Moa. Se realizaron experimentos de estrangulación con la válvula en la descarga de la bomba, con el objetivo de obtener las curvas características del sistema para varios números de revoluciones, además de evaluar el comportamiento de la red de tuberías y accesorios. Dentro de los principales resultados se encontraron las curvas características de la bomba centrífuga лG carga-capacidad, potencia-caudal, rendimiento-caudal para el transporte de agua cruda a temperatura de 26 °C. El análisis de la red de tuberías y accesorios junto con las curvas características arrojan los puntos de operación del sistema de bombeo, encontrándose entre los rangos operacionales de este.
The design, performance of technological parameters, and operation of the semi-industrial hydrotransport installation of the University of Moa was studied. Throttling experiments were carried out with the valve in the pump discharge, with the aim of obtaining the characteristic curves of the system for various revolutions, in addition to evaluate the performance of the pipe and fittings network. Among the main results were the characteristic curves of the centrifugal pump лG load-capacity, power-flow, and performance-flow for transporting raw water at 26 ° C of temperature. The operating points of pumping system were obtained when analyzing the network of pipes and fittings together with the characteristic curves yield being among its operational ranges.
© 2001-2026 Fundación Dialnet · Todos los derechos reservados