Development of a finite volume method for elastic materials and fluid-solid coupled applications
- Autores: Ignacio González Acedo
- Directores de la Tesis: Carlos David Pérez Segarra (dir. tes.)
- Lectura: En la Universitat Politècnica de Catalunya (UPC) ( España ) en 2019
- Idioma: español
- Tribunal Calificador de la Tesis: Antonio Pascau Benito (presid.), Francesc Xavier Trias Miquel (secret.), Philip Cardiff (voc.)
- Programa de doctorado: Programa de Doctorado en Ingeniería Térmica por la Universidad Politécnica de Catalunya
- Materias:
- Texto completo no disponible (Saber más ...)
- Resumen
This thesis presents the development of a parallel finite volume numerical method to analyse thermoelastic and hyperelastic materials and applied problems with mutual interaction between a fluid and a structure.
The solid problem follows a cell-centred finite volume formulation for three-dimensional unstructured grids under the same framework that is frequently devoted to computational fluid dynamics. Second-order accurate schemes are used to discretise both in time and space. A direct implicit time integration promotes numerical stability when facing vibration and quasi-static scenarios. The geometrical non-linearities, encountered with the large displacements of both Saint Venant-Kirchhoff and neo-Hookean models, are tackled by means of an updated Lagrangian approach.
Verification of the method is conducted with canonical cases which involve: static equilibrium, thermal stress, vibration, structural damping, large deformations, nearly incompressible materials and high memory usage. Significant savings in computation time are achieved owing to the acceleration strategies implemented within the system resolution, namely a segregated algorithm with Aitken relaxation and a block-coupled system arrangement. The similarities between the block-coupled method and the displacement-based finite element method, with regards to the matrix form of the resulting equations, allow for including Rayleigh viscous damping within a finite volume solver.
The program for structures is to be coupled with the in-house fluid numerical models in order to produce a unified fluid-structure interaction platform, where an arbitrary Lagrangian-Eulerian approach is used to solve the flow in a conforming grid. As a first step, the method for incompressible Newtonian fluids is adapted to deal with structure-coupled problems. To do so, the Lagrangian-Eulerian version of the Navier-Stokes equations is presented, and automatic moving mesh techniques are developed. These techniques are designed to mitigate the mesh quality deterioration and to satisfy the space conservation law. Besides, a semi-implicit coupling algorithm, which only implicitly couples the fluid pressure term to the structure, is implemented. As a result, numerical stability for strongly coupled phenomena at a reduced computational cost is obtained. These new tools are tested on an applied case, consisting of the turbulent flow through self-actuated flexible valves.
Finally, a pioneering coupled numerical model for the thermal and structural analysis of packed-bed thermocline storage tanks is developed. This thermal accumulation system for concentrated solar power plants has attracted the attention of the industry due to the economic advantage compared to the usual two-tank system. Dynamic coupling among the thermoelastic equations for the tank shell and the numerical models for all other relevant elements of the system is considered. After validating the model with experimental results, the commercial viability of the thermocline concept, regarding energetic effectiveness and structural reliability, is evaluated under real operating conditions of the power plants.
