S. Valdez, A. Molina, B. Campillo, J. Juárez, A. Rodríguez
La aleación Al-Fe-Cr ha sido solidificada rápidamente por la técnica de melt-spinning. La estructura de los listones ha sido estudiada por SEM, TEM y Difracción de rayos-X. Los listones fueron recocidos a 500 °C durante 48 hrs. para estudiar la influencia del tratamiento térmico sobre la microestructura. La microestructura de los listones de la aleación ternaria Al-Fe-Cr sufrió un considerable refinamiento en comparación con la misma aleación producida por el método convencional de fusión y colado. El tamaño de grano de los listones decrece tanto como la velocidad de enfriamiento incrementa. Una estructura ordenada del tipo B2 fue obtenida para las aleaciones ternarias solidificadas rápidamente y recocidas en todas las velocidades de enfriamiento.
Al-Fe-Cr alloy was rapidly solidified by means of melt spinning technique. Alloy structure has been studied by SEM, TEM and X-Ray diffraction. The ribbons were annealing at 500 ��C during 48 hours, in order to study the influence of thermal treatment onto the Al-Fe-Cr microstructure. The melt-spun Al- Fe-Cr microstructure underwent a considerable refinement as compared with same composition alloy produced by conventional methods of melting and casting. In melt�]spun ribbons the grain size decreases as the cooling increases. An ordered B2 type structure was obtained in all ternary rapidly solidified and annealed alloys at all cooling rates schedules.
© 2001-2024 Fundación Dialnet · Todos los derechos reservados