Ayuda
Ir al contenido

Dialnet


Resumen de Development and characterization of a self-bioluminescent heavy metal cyanobacterial bioreporter strain

Keila Martín Betancor

  • RESUMEN El control de la calidad del agua y de los suelos requiere el desarrollo de técnicas combinadas para obtener información global sobre la composición química de la muestra y la evaluación de los efectos biológicos. En este sentido, los bioensayos de toxicidad se ha convertido en una herramienta muy útil ya que permiten obtener información sobre los efectos biológicos de un contaminante discriminando la fracción biodisponible y / o la toxicidad de los mismos. Otra aplicación de los bioensayos de toxicidad es el desarrollo y construcción de organismos reporteros o “bioreporters” para aplicaciones ambientales. Un bioreporter es una célula viva, intacta, que ha sido genéticamente modificada para producir una señal medible (gen reportero) en respuesta a un agente químico o físico específico en el medio ambiente. El uso de células enteras tiene una ventaja fundamental por el hecho de que reacciones complejas sólo pueden existir en una célula intacta, metabólicamente activa; De esta manera, pueden evaluarse parámetros globales tales como la biodisponibilidad de los contaminantes o la toxicidad. Los bioreporters constituidos por células enteras pueden ser básicamente de dos tipos: :(turn- off) que se reprimen en presencia de una muestra tóxica (portan fusiones de promotores constitutivos con los genes reporter) y aquellas que se inducen (turn-on) en presencia de un contaminante o un grupo de contaminantes concreto (portan fusiones de promotores inducibles frente a determinados compuestos y los genes reporter).

    Los metales pesados son uno de los contaminantes que generan mayor preocupación dada su persistencia en el medio ambiente y su alta toxicidad para todos los organismos. Dado que la toxicidad de los metales pesados viene determinada por su biodisponibilidad, la combinación de métodos químicos y bioreportes para detectarlos y cuantificarlos constituye una mejora en la realización de una evaluación ambiental.

    El objetivo principal de esta tesis fue la construcción de un bioreporter cianobacteriano turn-on (ligths-on, dado que el sistema génico reportero utilizado fue la luciferasa bacteriana) para detectar metales pesados biodisponibles en sistemas acuáticos. Esta nueva cepa bioreporter se basa en una cianobacteria unicelular de agua dulce, Synechococcus elongatus PCC 7942, denominada Synechococcus elongatus PCC 7942 pBG2120 que lleva una fusión transcripcional de la región promotora del locus cianobacteriano smt que codifica una metalotioneína cianobacteriana (SmtA) y un represor de su expresión (SmtB) a los genes luxCDABE de la bacteria luminescente terrestre Photorhabdus luminescens. Esta cepa bioreporter se ha utilizado para detectar 4 diferentes metales pesados tanto en medios de cultivo como en diferentes matrices ambientales en las que se incluye la detección de metales pesados procedentes de nanomateriales biocidas. Por otra parte, dado que los metales pesados están presentes como mezclas en el medio ambiente, se ha desarrollado e implementado un modelo matemático predictivo para analizar la respuesta del bioreporter a mezclas de metales pesados. Finalmente, dado que el mantenimiento a largo plazo es la principal limitación en la generalización del uso de estos sistemas biológicos en monitorización ambiental, se han desarrollado protocolos de liofilización para bioreporters basados en cianobacterias.

    CAPÍTULO I: Introducción general En este capítulo se presenta el estado actual de los siguientes temas: En Heavy metals in the environment, se introducen las principales razones de la presencia de metales pesados en el medio ambiente y las leyes actuales que regulan su aparición en los ambientes acuáticos. Además, se han detallado los métodos clásicos utilizados para detectar y cuantificar los metales pesados en el medio ambiente, así como los nuevos métodos basados en la detección de su fracción biodisponible. En Microbial bioreporters, se define el concepto de bioreporter microbiano, así como los diferentes tipos de bioreporters microbianos basado en su especificidad. En Reporter genes, se han detallado los principales sistemas utilizados como genes reporteros en la construcción de bioreporters microbianos y sus principales características. El epígrafe Microbial metal-resistance proteins and gene regulation, se ha dedicado a explicar en profundidad los distintos mecanismos que poseen los microorganismos para detectar y responder a flujos variables de metales en el medio ambiente, ya que estos genes de resistencia a metales pesados pueden ser potencialmente utilizados como el elemento sensor en el desarrollo de bioreporters capaces de detectar metales pesados en el medio ambiente. Heavy metals bioluminescent microorganisms-based bioreporters and applications recoge los bioreporters luminiscentes, tanto bacterianos como eucariotas, que existen actualmente para detectar metales pesados, indicando los genes de resistencia que se han utilizado como elemento sensor así como sus aplicaciones principales. En Cyanobacteria and their applications in environmental monitoring, las principales características de las cianobacterias son detalladas enfocándose en sus habilidades particulares para ser elegidas como organismos modelo para la evaluación ambiental, especialmente como bioreporters de contaminación ambiental en ecosistemas acuáticos. Dentro de esta 5 sección, se pueden encontrar los bioreporters luminiscentes basados en cianobacterias que existen hasta la fecha para determinar la toxicidad global de una muestra (Global toxicity cyanobacterial bioreporters) y para la detección específica de metales pesados (Cyanobacterial bioreporters responsive to heavy metals). La sección Turn-off vs. turn-on bioreporter dose-response curves sirve para indicar las principales diferencias en la respuesta de un bioreporter tipo turn-off (que se reprimen) y de uno tipo turn-on (que se inducen) y establece las bases para una mejor comprensión de las siguientes secciones, Theoretical models of chemical mixture effects y Current approach to study mixture in inducible systems. En la primera sección, se describen los dos métodos principales utilizados para estudiar los efectos de las mezclas, mientras que el último se centra en los métodos disponibles para estudiar el efecto de las mezclas en sistemas inducibles (turn-on). En Other potential application of the heavy metals bioreporters se describen otros usos de los bioreporters de metales pesados, específicamente, su uso para estudiar el efecto de los iones metálicos liberados de nanomateriales metálicos. Por último, en Preservation methods, se describen los principales métodos utilizados para mantener a los bioreporters viables y activos durante largos períodos de tiempo.

    CAPÍTULO II: Este capítulo está integrado por el manuscrito: - Construction of a self-luminescent cyanobacterial bioreporter that detects a broad range of bioavailable heavy metals in aquatic environments. Keila Martín-Betancor, Ismael Rodea-Palomares, M.A. Muñoz-Martin, Francisco Leganés, Francisca Fernández-Piñas. Frontiers in Microbiology. 6: Article 186. (2015).

    Keila Martín Betancor participó en este estudio desarrollando el diseño experimental, planificando y realizando los experimentos, procesando y analizando los datos y elaborando el material gráfico. La redacción y discusión del trabajo se realizó con la colaboración de todos los autores.

    Los metales pesados son contaminantes muy persistentes en el medio ambiente, por lo tanto, el control de la concentración de éstos en el medio ambiente es de gran importancia para asegurar que no produzcan un efecto tóxico sobre los organismos. Existen varios métodos químicos para determinar la concentración total de metales pesados, sin embargo, su toxicidad está estrechamente relacionada con su especiación en el medio 6 ambiente y por lo tanto con su biodisponibilidad. En este contexto, el uso de sistemas biológicos (bioreporters de células enteras) ofrece muchas ventajas, ya que la respuesta que muestran estos organismos es el resultado de la interacción directa con estos contaminantes y, por lo tanto, proporciona datos reales sobre la biodisponibilidad.

    En este manuscrito, se construyó una cepa bioreporter auto-luminiscente basada en la cianobacteria unicelular Synechococcus sp. PCC 7942 para detectar metales pesados biodisponibles y fue posteriormente utilizada para detectar diferentes metales pesados en medio de cultivo y en muestras ambientales con diferentes complejidades, concretamente se utilizaron dos muestras de río y una muestra obtenida del efluente de una depuradora de aguas. La optimización del bioreporter se realizó midiendo la luminiscencia emitida a diferentes densidades ópticas y diferentes tiempos de exposición a metales pesados. Además, dada la importancia de la especiación de metales pesados en las diferentes matrices, se utilizó un modelo químico para vincular la respuesta del bioreporter con la especiación y la biodisponibilidad del metal. Los resultados de este trabajo revelaron que el bioreporter respondió linealmente a los cationes divalentes de Zn, Cd, Cu, Co, Hg y monovalente de Ag con diferentes límites de detección (LOD) y diferentes niveles de inducción. Los experimentos de muestras ambientales validaron el uso de este bioreporter para la detección de metales pesados biodisponibles en ambientes acuáticos.

    CAPÍTULO III: Este capítulo está integrado por el manuscrito: - Defining an additivity framework for mixture research in inducible whole-cell biosensors. Keila Martín-Betancor, Christian Ritz, Francisca Fernández-Piñas. Francisco Leganés and Ismael Rodea-Palomares. Scientific Reports. 5: 17200 (2015).

    Este trabajo fue desarrollado en colaboración con el Dr. Christian Ritz del departamento de Nutrición, Ejercicio y Deportes de la Universidad de Copenhague (Dinamarca).

    Keila Martín Betancor participó en este estudio desarrollando el diseño experimental, planificando y realizando los experimentos, procesando y analizando los datos y elaborando el material gráfico. Christian Ritz se encargó de programar el modelo desarrollado en el paquete drc del software R. La redacción y discusión del trabajo se realizó con la colaboración de todos los autores.

    7 Los compuestos químicos están presentes en mezclas en el medio ambiente, por lo que se requieren métodos y modelos para analizar y predecir el efecto de estas mezclas con el fin de mejorar la evaluación de riesgo ambiental. Existen varios modelos disponibles para estudiar el efecto de las mezclas químicas (principalmente, Independent action y Concentration addition), aplicable en el campo de la toxicología global (por ejemplo, en bioreporters de tipo turn-off); Sin embargo, los métodos para estudiar el efecto de las mezclas en sistemas inducibles (bioreporters de tipo turn-on) son prácticamente inexistentes.

    En este manuscrito, se desarrolló un nuevo modelo matemático basado en la aditividad para estudiar el efecto de las mezclas en el contexto de bioreporters de células enteras de tipo inducible (turn-on). Además, este modelo fue implementado en R, un software libre para el uso de métodos estadísticos. Este método propone una extensión multivariada de la dosis efectiva (EDp) que permite tener en cuenta la aparición de efectos máximos diferentes y curvas dosis-respuesta bifásicas (típicas de sistemas inducibles) lo cual es una mejora de los métodos actuales para poder predecir y estudiar la interacción de mezclas de contaminantes a través de la respuesta de un sistema inducible. Este método se ilustró estudiando la respuesta del bioreporter cianobacteriano Synechococcus elongatus PCC 7942 pBG2120 (construido y caracterizado previamente) a mezclas binarias de seis metales pesados (Zn, Cd, Cu, Co, Hg y Ag). Los resultados destacados de este manuscrito fueron la posibilidad, por primera vez, de predecir las respuestas de los sistemas inducibles a las mezclas de compuestos utilizando la información experimental de los compuestos cuando están presentes de forma individual y la posibilidad de investigar las desviaciones de la aditividad (sinergia y antagonismo). La respuesta del bioreporter Synechococcus PCC 7942 pBG2120 a las mezclas binarias de metales pesados se pudo considerar aditiva excepto cuando Hg, Co y en menor medida, Ag estaban presentes en las mezclas lo que dio lugar a importantes desviaciones de la aditividad.

    CAPÍTULO IV: Este capítulo está integrado por el manuscrito: - Co, Zn and Ag-MOFs evaluation as biocidal materials towards photosynthetic organisms. Keila Martín-Betancor, Sonia Aguado, Ismael Rodea-Palomares, Miguel Tamayo- 8 Belda, Francisco Leganés, Roberto Rosal and Francisca Fernández-Piñas. Science of the total environment. 595: 547-555 (2017).

    Este trabajo fue desarrollado en colaboración con el grupo de investigación del Dr. Roberto Rosal del departamento de Ingeniería Química de la Universidad de Alcalá. Madrid, España).

    Keila Martín Betancor participó en este estudio desarrollando el diseño experimental, planificando y realizando los experimentos, procesando y analizando los datos y elaborando el material gráfico. Sonia Aguado llevó a cabo la síntesis de los MOF utilizados en este estudio. La redacción y discusión del trabajo se realizó con la colaboración de todos los autores.

    Los nanomateriales metálicos son una de las últimas aplicaciones de metales pesados. Estos nanomateriales son ampliamente utilizados debido a sus propiedades biocidas. Entre estos nanomateriales metálicos, los Metal Organic Frameworks (MOFs) son uno de los últimos desarrollos en nanotecnología y ofrecen múltiples ventajas como materiales biocidas ya que son materiales de naturaleza inorgánica-orgánica construidos directamente con el metal deseado unido por enlaces covalentes. Dada su estructura, permiten una liberación más controlada de los iones metálicos en comparación con otros materiales metálicos.

    En el presente trabajo se ha evaluado, por primera vez, la actividad biocida de tres MOFs diferentes basados en Co (Co-SIM1), Zn (Zn-SIM1) y Ag (Ag-TAZ), frente a organismos fotosintéticos, concretamente, un alga verde, Chlamydomonas reinhardtii y dos cepas diferentes de cianobacterias, una filamentosa, Anabaena sp. PCC 7120 y una unicelular, Synechococcus sp. PCC 7942. Además, como resaltan algunos autores, es importante comprender el mecanismo de acción de los compuestos antimicrobianos antes de su aplicación a gran escala. Como se indicó anteriormente, uno de los principales aspectos que determinan la toxicidad de los metales pesados es su especiación y por lo tanto su biodisponibilidad. Por lo tanto, el metal liberado de estos MOFs y la biodisponibilidad de estos metales se estudiaron usando ICP-MS, el programa de especiación química, Visual MINTEQ y el bioreporter de metales pesados construido en esta tesis Synechococcus sp. PCC 7942 pBG2120. A través de este estudio, se encontró que ambas cianobacterias presentaban una gran sensibilidad a los tres MOFs diferentes, mientras que el alga mostró una gran sensibilidad a Ag-TAZ, pero fue mucho más resistente a los MOFs basados en Co y Zn. Estas diferencias se deben probablemente a las diferencias en la composición de 9 la pared celular de estos organismos. Además, mediante el uso del bioreporter basado en Synechococcus, se determinó que la actividad biocida presentada por estos MOFs se debe principalmente a la concentración de iones metálicos liberados de estos MOFs.

    CAPÍTULO V: Este capítulo está integrado por el manuscrito: High-throughput freeze-dried cyanobacterial bioassay for fresh-waters environmental monitoring Keila Martín-Betancor, Marie-José Durand, Gérald Thouand, Francisco-Leganés, Francisca Fernández-Piñas, Ismael Rodea-Palomares (No publicado).

    Este trabajo fue desarrollado en colaboración con el grupo de investigación del Dr. Gerald Thouand y la Dra. Marie-Josee Durand de la Universidad de Nantes, Francia.

    Keila Martín Betancor participó en este estudio desarrollando el diseño experimental, planificando y realizando los experimentos, procesando y analizando los datos y elaborando el material gráfico. El protocolo de liofilización se desarrolló bajo la guía del Dr. Gerald Thouand y la Dra. Marie-Jose Durand. La redacción y discusión del trabajo se realizó con la colaboración de todos los autores.

    La mayor limitación para generalizar el uso de los bioreporters (tanto turn-on como turn-off) en la monitorización ambiental es la falta de métodos que permitan mantener la viabilidad y la actividad de los bioreporters a lo largo del tiempo, con el objetivo final de desarrollar un dispositivo celular autónomo o biosensor. Esta carencia es de gran importancia en el caso de los bioreporters cianobacterianos ya que no se han probado muchos métodos para mantenerlos viables y activos a lo largo del tiempo. En el presente manuscrito, se aplicó por primera vez un método de liofilización a un bioreporter cianobacteriano, especialmente, al bioreporter bioluminiscente constitutivo Anabaena CPB4337. Esta cianobacteria lleva en su cromosoma un derivado tn5 con los genes luxCDABE. Con el fin de seleccionar el protocolo óptimo de liofilización, se evaluó el efecto de diferentes fases de crecimiento celular, crioprotectores, protocolos de congelación, soluciones de rehidratación y condiciones de incubación. Como conclusión de este estudio, se definió el protocolo óptimo para la liofilización de este bioreporter cianobacteriano. Esta cianobacteria liofilizada fue, en general, más sensible a los metales pesados (Cu, Zn y Cd) y a los productos químicos orgánicos (atrazina y fenol) que los 10 ensayos estándar. La viabilidad de las células permaneció durante tres años, aunque después de 1 y 3 años de almacenamiento, la bioluminiscencia basal de las células disminuyó un orden de magnitud. Los metales pesados se utilizaron para evaluar la sensibilidad del bioreporter a lo largo del tiempo, concluyendo que la sensibilidad a los metales pesados permaneció prácticamente constante, excepto en el caso de Cu después de 1 año (p <0,1) y 3 años (p <0,05) y Zn después de 3 años (p <0,05) cuya sensibilidad aumentó significativamente.

    11 SUMMARY 12 13 SUMMARYSUMMARY SUMMARYSUMMARY SUMMARY The control of the quality of water and soils requires the development of combined techniques to obtain global information on the chemical composition of the sample and the evaluation of biological effects. In this sense, toxicity bioassays have become a very useful tool since they allow obtaining information on the biological effects of a pollutant by discriminating the bioavailable fraction and / or toxicity of the same. A further progress of toxicity bioassays is the development and construction of bioreporters for environmental applications. A bioreporter is an intact, living cell, which has generally been genetically engineered to produce a measurable signal (reporter gene) in response to a specific chemical or physical agent in the environment. The use of whole cells has a fundamental advantage for the fact that a series of complex reactions can exist only in an intact, metabolically active cell; in this way, global parameters such as the bioavailability of the contaminants or the toxicity can be evaluated. Whole-cell bioreporters can basically be of two types: turn-off bioreporters, in which reporter signal decreases in the presence of a toxic sample (they carry fusions of constitutive promoters with the reporter genes) and turn-on bioreporters in which reporter signal increases in the presence of a particular pollutant or group of contaminants (carry fusions of inducible promoters against certain compounds with reporter genes).

    Heavy metals are one of the pollutants that generate greater concern in the environment given their persistence and their high toxicity for all organisms. Since the toxicity of heavy metals is determined by their bioavailability in the environment, the combination of chemical methods and bioreporters to detect and quantify them is an improvement to perform an environmental assessment.

    The aim of the present study was to construct a cyanobacterial turn-on (lights-on, because the reporter system used was luciferase) bioreporter strain for detecting bioavailable heavy metals in aquatic systems. This new bioreporter strain is based on a freshwater unicellular cyanobacterium, Synechococcus elongatus PCC 7942, derivative strain named Synechococcus elongatus PCC 7942 pBG2120 which carries a transcriptional fusion of the promoter region of the smt cyanobacterial locus encoding a cyanobacterial metallothionein (SmtA) and a repressor of its expression (SmtB) to the luxCDABE genes of the terrestrial luminescent bacteria Photorhabdus luminescens. This bioreporter strain has been used to detect different heavy metals both in culture media and in different 14 environmental matrices including biocidal nanomaterials. Furthermore, as heavy metals are present as mixtures in the environment, a predictive mathematical model has been developed and implemented to analyse the response of the bioreporter to heavy metal mixtures. Finally, as long-term maintenance is the main limitation in the generalization of the use of these biological systems in environmental monitoring, freeze-dried protocols for cyanobacterial bioreporters have been performed.

    CHAPTER I: General introduction In this chapter, a state of the art is presented on the following topics: Heavy metals in the environment, the main reasons for the occurrence of heavy metals in the environment and current laws regulating their appearance in the aquatic environments have been introduced. In addition, the classical methods used to detect and quantify them in the environment as well as new methods based on the detection of their bioavailability have been detailed. In Microbial bioreporters, the concept of microbial bioreporter has been defined as well as the different types of microbial bioreporters based on their specificity. In Reporter genes, the main systems used as reporter genes in the construction of microbial bioreporters and their main characteristics have been itemised. Microbial metal-resistance proteins and gene regulation, is dedicated to explain in depth the microorganism mechanisms to sense and respond to variable fluxes of metals in the environment since they are the potential genes that could be used as the sensor element in the development of bioreporters capable of detecting heavy metals in the environment. Heavy metals bioluminescent microorganisms-based bioreporters and applications section collects the luminescent bioreporters, both bacterial and eukaryotic, to detect heavy metals that currently exist and the promoters of the resistance genes that have been used for their construction as well as their main applications have been indicated. In Cyanobacteria and their applications in environmental monitoring, the main characteristics of cyanobacteria are reviewed focusing on their particular skills to be chosen as model organisms for environmental application, especially as bioreporters of environmental pollution in aquatic ecosystems. Within this section, the luminescent cyanobacteria-based bioreporters that exist to date both to determine the overall toxicity of a sample (Global toxicity cyanobacterial bioreporters) and for the specific detection of heavy metals (Cyanobacterial bioreporters responsive to heavy metals) can be found. Turn-off vs. turn-on bioreporter dose-response curves section serves to indicate the main 15 differences of a turn-off and turn-on bioreporter output and establishes the basis for a better understanding of the following sections, the Theoretical models of chemical mixture effects and the Current approach to study mixture in inducible systems. In the former, the two main methods used to study mixtures effects are described while the latter is focused on the methods available to study the effect of mixtures on inducible systems (turn-on). In Other potential application of the heavy metals bioreporters are described other uses of the heavy metals bioreporters, specifically, the use of them to study the effect of metal ion released from metal nanomaterials. And finally, in preservation methods, the main methods used to keep bioreporters viable and active for long periods of time are described.

    CHAPTER II: This chapter is integrated by the manuscript: - Construction of a self-luminescent cyanobacterial bioreporter that detects a broad range of bioavailable heavy metals in aquatic environments. Keila Martín-Betancor, Ismael Rodea-Palomares, M.A. Muñoz-Martin, Francisco Leganés, Francisca Fernández-Piñas. Frontiers in Microbiology. 6: Article 186. (2015).

    Keila Martín Betancor participated in this study developing the experimental design, planning and performing the experiments, processing and analyzing the data and preparing the graphical material. The writing and discussion of the paper was carried out with the collaboration of all authors.

    Heavy metals are very persistent pollutants in the environment, thus, the control of the concentration of these in the environment is of great importance to ensure that they do not produce a toxic effect on organisms. Several chemical methods are available to determine the total concentration of heavy metals, however, their toxicity is closely related to their speciation in the environment and therefore with their bioavailability. In this context, the use of biological systems (whole-cell bioreporters) provides many advantages since the response displayed by these organisms is a result of direct interaction with these pollutants and therefore provides real data on bioavailability.

    In this manuscript, the construction of the self-luminescent bioreporter strain of the unicellular cyanobacterium Synechococcus sp. PCC 7942 for bioavailable heavy metals detection was constructed and applied to detect different heavy metals in culture medium 16 and in real environmental samples with different water matrix complexity, specifically, two river samples and one wastewater effluent sample. The optimization of the bioreporter was carried out by measuring the luminescence emitted at different optical densities and different times of heavy metals exposure. Furthermore, given the importance of heavy metals speciation in the different matrices, a chemical model was used to link the bioreporter response with metal speciation and bioavailability. Results of this work revealed that the bioreporter responded linearly to divalent Zn, Cd, Cu, Co, Hg and monovalent Ag with different limits of detection (LODs) and different induction levels. The real environments samples experiments validated the use of this bioreporter for free heavy metals cations bioavailability detection in aquatic environments.

    CHAPTER III: This chapter is integrated by the manuscript: - Defining an additivity framework for mixture research in inducible whole-cell biosensors. Keila Martín-Betancor, Christian Ritz, Francisca Fernández-Piñas. Francisco Leganés and Ismael Rodea-Palomares. Scientific Reports. 5: 17200 (2015).

    This work was developed in collaboration with Dr. Christian Ritz from the department of Nutrition, Exercise and Sports of the University of Copenhagen (Denmark).

    Keila Martín Betancor participated in this study developing the experimental design, planning and performing the experiments, processing and analyzing the data and preparing the graphical material. Christian Ritz was in charge of programming the model developed in the drc package of R software. The writing and discussion of the paper was carried out with the collaboration of all authors.

    Chemicals in the environment are present in mixtures, thus, methods and models are required to analyse and predict the effect of mixtures in order to improve risk assessment. There are several models available for studying the effect of chemical mixtures (mainly Independent action and Concentration addition), applicable in the field of global toxicology (e.g., turn-off bioreporters); however, methods for studying the effect of mixtures on inducible systems (turn-on bioreporters) are practically non-existent.

    In this manuscript, a novel additivity framework for mixture effect modelling in the context of whole-cell inducible biosensors has been mathematically developed and 17 implemented in R, a free software for statistical methods. This method proposes a multivariate extension of the effective dose (EDp) to take into account the occurrence of differential maximal effects and biphasic-dose response curves (typical of inducible systems) which is an improvement of the current methods to be able to predict and study the interaction of pollutants mixtures through the output of an inducible system. This method was illustrated studying the response of the cyanobacterial bioreporter Synechococcus elongatus PCC 7942 pBG2120 (previous constructed and characterized) to binary mixtures of six heavy metals (Zn, Cd, Cu, Co, Hg and Ag). The results highlighted in this manuscript are the possibility, for the first time, of predicting inducible whole-cell systems responses to mixtures using single chemical experimental information only and the possibility of investigating departures from additivity (synergism and antagonism). The response of Synechococcus PCC 7942 pBG2120 to the heavy metal binary mixtures can be considered nearly additivite except when Hg, Co and to lesser extend Ag were present in the mixtures which resulted in important departures from additivity.

    CHAPTER IV: This chapter is integrated by the manuscript: - Co, Zn and Ag-MOFs evaluation as biocidal materials towards photosynthetic organisms. Keila Martín-Betancor, Sonia Aguado, Ismael Rodea-Palomares, Miguel Tamayo-Belda, Francisco Leganés, Roberto Rosal and Francisca Fernández-Piñas. Science of the total environment. 595: 547-555 (2017).

    This work was developed in collaboration with the research group of Dr. Roberto Rosal from the department of Chemical Engineering of the Universidad de Alcalá. Madrid (Spain).

    Keila Martín Betancor participated in this study developing the experimental design, planning and performing the experiments, processing and analyzing the data and preparing the graphical material. Sonia Aguado carried out the synthesis of MOFs used in this study. The writing and discussion of the paper was carried out with the collaboration of all authors.

    Metallic-nanomaterials are one of the latest applications of heavy metals. These nanomaterials are widely used due to their biocidal properties. Among these metal- 18 nanomaterials, Metal Organic Frameworks (MOFs) are one of the latest development in nanotechnology and provide multiple advantages as biocidal materials since they are inorganic-organic materials constructed directly with the desired metal linked by covalent bonds. Given their structure a more controlled release of metal ions are found in comparison with other metal-containing materials.

    In the present manuscript, the biocidal activity of three different MOFs based on Co (Co-SIM1), Zn (Zn-SIM1) and Ag (Ag-TAZ) have been evaluated, for the first time, to photosynthetic organisms, especially, towards one green alga, Chlamydomonas reinhardtii and two different cyanobacterial strains, one filamentous, Anabaena sp. PCC 7120 and one unicellular, Synechococcus sp. PCC 7942. Furthermore, as highlighted by some authors, it is important to understand the key mechanism of action of potential antimicrobial compounds prior to their large-scale application. As indicated before, one of the main aspects that determines the toxicity of heavy metals is their speciation and therefore their bioavailability. Thus, metal released from these MOFs and bioavailability of these metals were studied using ICP-MS, the chemical speciation program, Visual MINTEQ and the heavy metal bioreporter constructed in this thesis Synechococcus sp. PCC 7942 pBG2120. Through this study, we found that both cyanobacteria presented high sensitivity to the three different MOFs while the green alga was very sensitivity to Ag-TAZ but much more resistant to Co and Zn-based MOFs most likely due to differences in the composition of the cell wall. Moreover, by the use of the Synechococcus-based bioreporter, we elucidated that the biocidal activity presented by these MOFs was mainly due to the concentration of free metal ion released from these MOFs.

    CHAPTER V: This chapter is integrated by the manuscript: - High-throughput freeze-dried cyanobacterial bioassay for fresh-waters environmental monitoring Keila Martín-Betancor, Marie-José Durand, Gérald Thouand, Francisco-Leganés, Francisca Fernández-Piñas, Ismael Rodea-Palomares (Unpublished).

    This work was developed in collaboration with the research group of Dr. Geral Thouand and Dr. Marie-Jose Durand from the University of Nantes, France.

    19 Keila Martín Betancor participated in this study developing the experimental design, planning and performing the experiments, processing and analyzing the data and preparing the graphical material. The freeze-drying protocol was developed under the guidance of Dr. Gerald Thouand and Dr. Marie-Jose Durand. The writing and discussion of the paper was carried out with the collaboration of all authors.

    The greatest limitation to generalize the use of the bioreporters (both turn-off and turn-on) in environmental monitoring is the lack of methods that allow maintaining the viability and the activity of the bioreporters for a long time, and as the ultimate goal to develop an autonomous cell-device or biosensor. This lack is of great importance in the case of cyanobacterial-based bioreporters since not many methods to keep them viable and active over time have been tested. In the present manuscript, a freeze-dried method was applied for the first time to a cyanobacterial-based bioreporter, especially, to the constitutively bioluminescent bioreporter Anabaena CPB4337. This cyanobacterium bears in its chromosome a tn5 derivative with luxCDABE genes. In order to select the optimal freeze-drying protocol, the effect of different cell growth phases, cryoprotectants, freezing protocols, rehydration solution and incubations conditions methods were evaluated. As a conclusion of this study, we defined the optimal protocol for freeze-drying this cyanobacterial-based bioreporter. This freeze-dried cyanobacterium was, in general, more sensitive to heavy metals (Cu, Zn and Cd) and to organic chemicals (atrazine and phenol) than standard assays. The viability of the cells remained for three years, although after 1 year or 3 years of storage, the basal bioluminescence of the cells decreased one order of magnitude. Heavy metals were used to assess the sensitivity of the bioreporter over time, concluding that the sensitivity to heavy metals remained practically constant except for the case of Cu after 1 year (p < 0.1) and 3 years (p < 0.05) and Zn after 3 years (p < 0.05) whose sensitivity increased significantly.

    20


Fundación Dialnet

Dialnet Plus

  • Más información sobre Dialnet Plus